Vivotek IP3111/IP3121 user manual 886-2-22404099 886-2-22404097

Page 48

the client side will receive the poor quality of media. For improving this situation, you can check the “Improve audio quality in low bandwidth environment” item. It can make the audio quality better, but the media delay is longer and real-time issue is bad. If the network performance is worst, please select the ”UDP protocol“ as the communication protocol in “client setting

After everything is set, click on . A warning message will pop up. Click on to confirm. NetworKam will automatically restart. If "Reset network at next boot" is kept checked, run the installer procedure again. Otherwise NetworKam will restart automatically.

Administrators should notice that the IP address, subnet mask, default router and DNS servers will be cleared when the network interface is switched to the other. Refer to the related section of Ethernet or modem for software installation.

47

www.vivotek.com

T: 886-2-22404099

F: 886-2-22404097

Image 48
Contents NetworKam Before You Use Table of Contents How to Use Telnet Appendix Package Contents 886-2-22404099 886-2-22404097 Physical Description Rear PanelEthernet 10/100 socket COM portGeneral I/O terminal block Status LEDs Restore button Power adapterAuto Iris Lens Connector How to Install Hardware installation Ethernet EnvironmentCable connection Power on Software configuration Easy way with installer program886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Manual way with existing programs First access to NetworKam 886-2-22404099 886-2-22404097 Modem Environment Cable connection Install a new modem 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Setup a new connection 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 First access to NetworKam 886-2-22404099 886-2-22404097 How to Use Authentication 886-2-22404099 886-2-22404097 Primary user’s capability Main screen with camera viewPan/Tilt positioning device control Client Setting Url http//NetworKam/client.html System configuration System parameters User group administration Network settings 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Video codec parameters 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Motion detection 886-2-22404099 886-2-22404097 Camera positioning device configuration 886-2-22404099 886-2-22404097 Modem and dialup settings 886-2-22404099 886-2-22404097 Application 886-2-22404099 886-2-22404097 Homepage layout settings One-shot fast configuration via FTP Read only string For teal For blank, 1 for default image or 2 for loading from URL Standard IP format or string shorter than 40 characters 1200k , 1000k , 768k , 512k , 384k , 256k , 128k , 64k 3, 5, 10, 15, 20, 25, 30 30 for Ntsc only Home Restore factory default settings Advanced functionsViewing system log Viewing system parametersUploading snapshots periodically to an external FTP server Customizing homepage imagesUploading the configuration file Software revision upgrade886-2-22404099 886-2-22404097 System core debugging Monitor changed status of digital inputsStop information dumping Query status of digital inputsSkip installation during the next boot Reset network for new settingsReset system Set digital outputsURL commands of NetworKam Capture update Snapshot of Jpeg imageClear data mode serial port driver Move motorized device in PT directionRestart system URL General format of command URL System configuration URLSystem resource URL Security configuration URL Network configuration URLVideo configuration URL Image quality configuration URL Camera configuration URL Camera custom command configuration URLModem configuration URL Application configuration URLHomepage layout configuration URL Post procedure AppendixFrequently asked questions 886-2-22404099 886-2-22404097 886-2-22404099 886-2-22404097 Technical specifications NetworkingElectromagnetic Compatibility EMC