Turbosound TQ-445DP, TQ-310DP, TQ-425DP, TQ-315DP TQ-115DP connector panel functions, Limit HI

user manual

QLight™ DP series

TQ-115DP connector panel functions

10

9

8

Model No	TQ-115DP
Serial No	123456
Star Road, Partridge Green, West Sussex, RH13 8RY England
tel:+44 (0)1403 711447 fax:+44 (0)1403 710155 www.turbosound.com

Limit HI	CAUTION	ATTENTION
	RISK OF ELECTRIC SHOCK	RISQUE DO CHOC ELECTRIQUE
	DO NOT OPEN	NE PAS ENLEVER
	DO NOT EXPOSE TO	NE PAS EXPOSER A LA
	RAIN OR MOISTURE	PLUIE NI A L'HUMIDITE

Limit LO	CAUTION to reduce the risk of fire replace only with same	space
		for
	type and rating of fuse.	ETL & ETLc
	AVIS utiliser un fusible de rechange de meme type.	logo
Power
	THIS EQUIPMENT MUST BE EARTHED

		MODE			FUSE	115-230V
INPUT	LINK	WITH SUB	NO SUB	AUX	T10AL 250V	1000VA
		(speech)	(music)			50-60Hz

1 2 3 4 5 6 7

1.Signal input – lockable 3-pin XLR line input socket connects to audio mixer. Fully balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected.

2.Signal link – lockable 3-pin XLR line output socket links to additional cabinets. Fully balanced, pin 2 Hot, pin 3 Cold and pin 1 not connected.

3.Mode switch – lifts the overall gain of the subwoofer by 3dB.

4.Aux – RS232 port used for updating settings or firmware.

5.Fuse – AC line fuse. Replace only with 10A 230V anti-surge fuse.

6.Mains switch – turns AC power on to the unit.

7.AC mains connection - accepts Neutrik PowerCon® 3-pin cable-end connector.

8.Power - Blue LED indicates when AC power is applied to the amplifier module.

9.Limit (low) – red LED indicates limiting threshold of the low frequency section.

QLight DP series manual page 15