Turbosound TQ-310DP, TQ-445DP TQ-425DP self-powered subwoofer, TQ-115DP self-powered subwoofer

Page 13

user manual

QLight™ DP series

TQ-425DP self-powered subwoofer

The TQ-425DP is a self-powered dual 15” subwoofer designed for use with QLight™ series self- powered enclosures and when combined with the TQ-445DP it forms a formidable full-range sound reinforcement system with high SPL and negligible distortion.

Each of the high power neodymium 15” drive units are powered by an independent amplifier channel in order to preserve the maximum headroom capability and to ensure an optimum match with the drive units. The Class D amplifier module is located at the rear of the cabinet, removable for servicing, and carries all the necessary connections and operating controls.

The TQ-425DP can be permanently installed using flying strips which attach to the rigging points provided on the sides of the cabinet. In addition it is fitted with a pole mount socket that allows QLight™ series enclosures to be mounted on top at an optimum height.

TQ-115DP self-powered subwoofer

The TQ-115DP is a self-powered single 15” subwoofer designed for use with QLight™ series self- powered enclosures. It is particularly effective when combined with TQ-308DP and TQ-310DP loudspeakers to form a high quality full range and compact sound reinforcement system.

Its Class D amplifier module is situated at the rear of the cabinet and offers XLR input and parallel link connections, Neutrik PowerCon® AC mains connection and power switch, as well as system status LEDs. The auto-switching power supply allows the unit to be connected to AC mains outlets ranging from 100 volts to 230 volts.

The TQ-115DP can be permanently installed using flying strips which attach to the rigging points provided on the sides of the cabinet. In addition it is fitted with a pole mount socket that allows QLight™ series enclosures to be mounted on top at an optimum height.

QLight DP series manual page 13

Image 13
Contents TQ-308DP TQ-310DP TQ-315DP TQ-445DP TQ-425DP TQ-115DP Qlight DP Digital Power SeriesQLight DP series QLight DP series QLight DP series Important Safety Information Important Safety Information Thanks IntroductionUnpacking the TQ series loudspeaker Features TQ-310DP self-powered two-way loudspeaker TQ-308DP self-powered two-way loudspeakerProduct Range Summary Limit HI TQ-308DP and TQ-310DP connector panel functionsTQ-445DP self-powered three-way loudspeaker TQ-315DP self-powered two way loudspeakerTQ-315DP and TQ-445DP connector panel functions TQ-115DP self-powered subwoofer TQ-425DP self-powered subwooferTQ-425DP connector panel functions Limit HI TQ-115DP connector panel functionsSystem requirements TQ-308DP, TQ-310DP and TQ-315DP System RequirementsSystem requirements TQ-445DP System requirements TQ-425DP and TQ-115DPAC Power Requirements Power AmplifiersAmplifier Modules CoolingLimit LED Functions Limiting FunctionsUpdating firmware or loudspeaker parameters Mode a / Mode B switchEqualisation Converging Elliptical Waveguides Rigging Hardware Mounting and FixingQLight DP series QLight DP series Choosing the best location Permanent InstallationsQLight DP series Removal of the 12/1 driver TQ-445DP Removal of the HF unit TQ-308DP, TQ-310DPRemoval of the low frequency driver TQ-425DP Removal of the midrange unit TQ-445DPRemoval of the low frequency driver TQ-115DP Removal of the amplifier module all models Flying accessories Appendix a Spares and AccessoriesAppendix B Technical Specifications QLight DP series Limited Warranty Appendix C WarrantyWarranty Coverage ShippingIncidental and consequential damages