user manual
QLight™ DP series
MOUNTING AND FIXING
Rigging Hardware
A versatile range of mounting hardware is available that allows enclosures to be used in a variety of ways, in either mobile applications or permanent installations.
A top hat stand type fitting is mounted in the base of QLight™ series cabinets for use with 35mm diameter loudspeaker stands with a load rating of at least 37kgs (82lbs).
Pole mount sockets are also fitted to the top of QLight™ series subwoofers. This allows these two enclosures to be used together as an extended frequency range system as shown with the TQ-445DP mounted above the TQ-425DP. An optional 35mm diameter straight pole used between these enclosures enables a minimum footprint and ensures the correct vertical distance between cabinets.
Internal metric threaded rigging points are provided on the TQ-445DP cabinet enabling it to be flown using optional M10 shoulder eyebolts. Downward inclination of the enclosure can be adjusted using an additional rigging point on the rear of the cabinet. Note: these rigging points must NOT be used to rig a second enclosure in a vertical column.
Side-mounted flying strips can be fitted to the sides of the TQ-445DP enclosure by removing the countersunk bolts on the top and sides of the cabinet and replacing them with the M10 bolts supplied with the hardware. Two flying strips are required for each enclosure; one attached to each side. This method offers a simple and cost effective method of flying single enclosures in permanent installations. Enclosures may be arranged in a vertical column by coupling the flying strips together using QL-75
QLight DP series manual page 21
