user manual
QLight™ DP series
from the cabinet. WARNING - this unit is heavy! Disconnect the cables from the loudspeaker terminals and completely remove the driver from the cabinet. Make a note of the driver polarity for later reconnection.
To reinstate the driver, simply reverse the procedure making sure you observe the correct polarity when reconnecting the cables back into the terminals of the drive units.
Removal of the amplifier module – all models
Release the M5 and M6 Allen head bolts securing the amplifier module to the rear of the cabinet and disconnect the spade connections from the module. The module can now be lifted clear of the cabinet and set aside.
Replacement is a straightforward reversal of the above procedure. The wires should be connected as follows:
Channel A + : Red
Channel A
Channel B + : Brown
Channel B
QLight DP series manual page 28