Step 4.
Connect the cables from the MobileRACK drive tray to the appropriate pin connectors of the 3.5” HDD. Attach the power and IDE cables from the MobileRACK tray to the 3.5” HDD. The colored stripe on the IDE cable should be closest to the power connector.
Power Connector
IDE
Data Cable
MobileRACK Drive Tray with Cover Removed
Step 5.
Carefully position the 3.5” HDD inside the MobileRACK drive tray. Secure the HDD in place using the supplied mounting screws. Use the mounting holes on the sides or bottom, depending on the design of the HDD.
Mounting | Power | Colored Stripe | |
Connector |
| ||
Screws | IDE | ||
| |||
|
| ||
|
| Data Cable |
Mounting
Screws
Mount the Drive in the MobileRACK Drive Tray
12 |