VIPowER VPM-6248T user manual Step

Page 31

Step 3:

Right-click on the partition status area of the USB 2.0 Hard Disk Drive. Click on [Create Partition….] and the “Create partition

wizard” will appear.

Step 4:

Follow the instructions of the wizard to partition and format your USB 2.0 Hard Disk Drive.

After you have completed the partitioning and formatting of the USB 2.0 Hard Disk Drive, you can write data to it.

Image 31

Contents VPM-6248T Proprietary Notice Contents Introduction Features and SpecificationsVPM-6248T External Enclosure Operating Systems MobileRACKPackage Contents Package ChecklistTemperature Control Jumper Settings Hardware InstallationRemove Mounting Screws to Remove Cover Temperature Control Jumper Locations Factory Configuration with MobileRACK Configuration with the MobileRACKRemove the MobileRACK Drive Tray LED IndicatorsMounting a 3.5-inch Drive in the MobileRACK VPM-6248T Front Panel with the MobileRACKRemove Front Panel for Removable Media Drives Remove the MobileRACK Drive Tray CoverMount the Drive in the MobileRACK Drive Tray MobileRACK Drive Tray with Cover RemovedInsert Drive Tray into VPM-6248T Enclosure Connecting the VPM-6248T to a ComputerReplace the MobileRACK Drive Tray Cover Computer RequirementsSlide the Latch-switch Left to Lock VPM-6248T Connections VPM-6248T External Connector LocationsWindows 98SE Driver InstallationStep Select Win98 under the Drivers directory, then click OK Click Next Step Windows Me/2000/XP Mac OS Connecting the VPM-6248T to Computer Using the VPM-6248T External EnclosureWindows Disconnecting the VPM-6248T from ComputerWindows Me/2000/XP Latch-lock Switch Positions Using the MobileRACK Drive TrayMac OS Partitioning Under Windows 98/ME Partitioning the External USB 2.0 Hard DiskMethod At the DOS prompt, type Fdisk and press Enter Step Partitioning under Windows 2000/XP Step Step Printed on recycled paper