Victor Enterprise 1260-3 manual 19. + Sign Change Key, 20. ∆% Delta Percentage, 23. − Minus Key

Page 10

19. [+/-]

Sign Change Key

 

Reverse the sign on the display.

20. [%]

Delta Percentage

 

Automatically compares any two amounts and then calculates and

 

prints the difference and percent of change.

21. [C/CE]

Clear / Clear Entry Key

Clears a live entry by pressing this key once. Press twice to clear the accumulator or pending calculation. Does not clear the Memory or Grand total.

22.[0]-[9], [00] & [] Numeric Keys

The calculator uses the conventional 10-key indexing keyboard, and includes the double zero key and decimal point key. Whole numbers are entered exactly as they are written.

23. []

Minus Key

 

Subtracts an amount from the accumulator. To subtract the same

 

amount more than one time (repeat subtraction), enter that amount

 

once and depress the Minus key as many times as necessary. If this

 

key is depressed immediately after [%] key, it works as percent minus

 

key.

24. [+]

Plus Key

 

Adds an amount to the accumulator. To add the same amount more

 

than one time (repeat addition), enter that amount once and depress

 

the Plus key as many times as necessary. If this key is depressed

 

immediately after [%] key, it works as percent plus key.

25.

[N]

Item Count Key

 

 

Calculations with item count and/or averaging. Also used to set the N

 

 

count to Gross or Net.

26.

[# / S]

Date / Subtotal Key

#: It will print live entry as an identifier as an invoice number with “#” mark.

 

S :

It prints but does not clear the accumulator.

27.

[T]

Total Key

 

 

Prints and clears the accumulator. When this key is pressed with the

 

 

“GT” switch is on, the result is accumulated automatically in the

 

 

memory register.

28. [MT]

Memory Total Key

 

 

Prints and clears the memory.

29.

[MS]

Memory Subtotal Key

 

 

Prints but does not clear the memory.

30.

[M-]

Memory Minus Key

 

 

Subtracts an amount from memory. If there is a live calculation

 

 

pending, the Memory Minus key will complete the calculation and

 

 

subtract the amount from Memory.

31.

[M +]

Memory Plus Key

 

 

Adds an amount to memory. If there is a live calculation pending, the

 

 

Memory plus key will complete the calculation and accumulate the

 

 

result to Memory.

32. [], [=]

Square Root

By depressing the and then the = key the square root result will be achieved.

- 10 -

Image 10
Contents 1260-3 Table of Contents General Maintenance Activate Backup BatteryReplacing the Ribbon HOW to Feed the Paper TapeReplace with Victor Ribbon #7010 Battery Replacement Press the Reset ButtonModel 1260-3 Keyboard Layout Units/price mode operation Slide Switch FeaturesF 0 2 3 4 Decimal Point Selector OFF/ON/PRINT Power/Printer Select Switch Sigma SwitchGrand Total Switch ↓ 5/4 ↑ Decimal Rounding SelectorKEY Features 21. C/CE Clear / Clear Entry Key 19. + Sign Change Key20. ∆% Delta Percentage 23. − Minus KeyFrench SpanishTable DES Matières Dessous du Remplacement DU Ruban Remplacer avec le ruban Victor #7010Remplacement DES Piles Model 1260-3 Keyboard Layout F 0 2 3 4 Sélecteur de Decimals 3,4Commutateur de grand total ↓ 5/4 ↑ Sélecteur d’arrondi décimalCommutateur Sigma OFF/ON/PRINT Sélecteur dimpressionCaractéristiques Principales 19. + Touche Changement de Signe Touche égalitéTouche Multiplication 20. ∆% Touche pourcentage de changement27. T Touche de total Touche du compteur darticles# / S Touche de date / sous-total Touche de effacement de mémoire de totalÍndice DE Contenidos Mantenimiento General Activar LA Batería DE ReservaComo Alimentar LA Cinta DE Papel Sustitución DE LA CintaSustituye con la Cinta Victor #7010 Reemplazo DE LA Bateria Presione EL Boton DEL ReajusteModel 1260-3 Keyboard Layout Disposicion DEL Teclado ↓ 5/4 ↑ Selector de Redondo Decimal Caracteristicas DE LOS InteruptoresF 0 2 3 4 Selector Decimal Unidades / Operación del Modo de PrecioSelector del Gran Total Selector SigmaOFF on Print Selector de la Impresora Caracteristicas DE LAS Teclas Tecla de Multiplicación 16. ⎟ Tecla de DivisiónTecla Igual Tecla del Signo de Cambio# / S Fecha / Tecla Subtotal 24. + Tecla de AdiciónContador de Partidas Tecla de TotalBackspace Retroceso Rappel Arriére Paper Papel BandeRounding Print Problem Problema Problème Enter Display Apriete Desplegado Appuyer Sur Afficher1132 11.32 798 19.30 0002 #/S 3333 14.03 003 Display Desplegado Afficher Problem Enter Problema Apriete Problème Appuyer SurPaper Papel Bande 54 + Problema Apriete Problème Appuyer Sur ProblemDisplay Paper Desplegado Papel Division División Division Problem Enter Display Problema AprieteProblème Appuyer Sur Afficher 755.00 ÷ 00 = 188.75 ∗ 409.00 = 102.25 ∗ 32.00 = 00 ∗ Rounding Print Decimal Problem Enter Display Problema Apriete 50 % Tax Calculation Calculo del Impuesto Calcul de la taxe Percent Add On Adicion del porcentaje Ajout pour cent Problème Appuyer SurRounding 60.00 ∆ 130.00 = 70.00 ∆ ∗ 116.67 ∆% Rounding Print 58.00 ÷ 58.00 R Rounding Print Decimal ∑ Quantity Price Net Payroll Nomina Paye Given FindMemory Calculation Cálculo De la Memoria Calcul De Mémoire Enter ProblemaDisplay Paper Desplegado Papel Afficher Bande 100 Setting the Date Ajuste de la Fecha Réglage de la Date ExempleSetting the Time Ajuste del Hora Réglage de la Heure Reglage Heure a 437 APRES-MIDIVictor Technology Only $25.00 Name DateVictor Technology West Belden Avenue Addison, IL Operaciones Básicas Power ConsumptionBasic Operations Opérations de baseWeight 4.1 lbs Peso 1.53kg Poids 1.53kg DimensionsDimensiones PantallaVictor Technology

1260-3 specifications

Victor Enterprise 1260-3 is a highly regarded cutting machine in the realm of industrial fabrication, optimized for efficiency and precision. This model is particularly appreciated by businesses looking to enhance productivity while maintaining quality in their cutting processes.

One of the standout features of the Victor Enterprise 1260-3 is its robust design, made to handle various materials effortlessly. It is equipped with an advanced plasma cutting system, allowing users to cut through metals with high accuracy and speed. The machine supports multiple cutting methods, including plasma, oxy-fuel, and water jet, making it versatile for different applications.

The 1260-3 model boasts an impressive cutting area, allowing for the accommodation of larger workpieces without the need for multiple setups. This expansive work area contributes to its time-saving capabilities, enabling operators to complete tasks in one session. The user-friendly interface simplifies operation, ensuring that even those new to industrial cutting can navigate the machine with ease.

Moreover, the Victor Enterprise 1260-3 employs cutting-edge motion control technology. This enhances the machine's operational speed and cutting precision, minimizing the risk of material wastage. The incorporation of CNC technology allows for automated processes, significantly improving overall efficiency. Operators can input detailed designs and specifications, and the machine executes them with pinpoint accuracy.

Another key characteristic is its adaptability to various environments. Whether in a manufacturing plant or a metal fabrication workshop, the 1260-3 is engineered for durability and reliability, capable of withstanding the rigors of daily use.

The machine is also equipped with safety features that protect operators and ensure compliance with industry standards. Emergency shut-off mechanisms, protective covers, and integrated safety protocols contribute to a secure working environment.

In conclusion, the Victor Enterprise 1260-3 stands out in the industrial cutting market for its combination of robust design, advanced technologies, and user-friendly features. It is a valuable asset for any business looking to enhance its productivity and precision in cutting applications, making it an excellent choice for metal fabrication and beyond.