XiNCOM XC-DPG503 manual VPN Policy Setup

Page 36

Policy Setup

VPN Policy Setup

IPSec Traffic Binding

VPN Tunnel List

It shows the tunnels that you have entered. The router can setup up to 50 tunnels

Tunnel Name

This distinguishes different “tunnels” by name.

Tunnel

The tunnel can only be connected when the Enable check box is selected.

WAN port

You can choose WAN1, WAN2 or Any to make the VPN connection.

PPPoE Session

Some ISPs offer multiple sessions when using PPPoE to make the VPN connection. You can select these PPPoE sessions to construct VPN tunnels.

Traffic Selector

Service

Protocol Type: You can choose either TCP/UDP/ICMP/GRE protocol as your connection protocol. By default the protocol type is “Any”.

Local Security Network

These entries identify the private network on the VPN gateway and the hosts of which can use the LAN-to-LAN connection. You can choose a single IP address, the subnet, or a selected IP range to make VPN LAN-to-LAN connection.

Remote Security Network

These entries identify the private network on the remote peer VPN router whose hosts can use the LAN-to-LAN connection. You can choose a single IP address, the subnet, or a selected IP range to make VPN connection

Remote Security Gateway

You can either select remote side domain name or remote side IP address (WAN IP address) as your remote side security gateway.

Security Level

Encryption Method

It specifies the encryption mechanism to use. Data encryption makes the data unreadable if intercepted. There are three encryption method available: DES, 3DES and AES. The default is null.

Authentication

This specifies the packet authentication mechanism to use. Packet authentication confirms the data’s source. There are three authentications available: MD5, SHA1 and SHA2.

36

Image 36
Contents Twin WAN VPN Gateway Table of Contents QoS Configuration VPN Configuration Introduction Use TWO ISPs for expanded bandwidth and redundancyFeatures Easy Setup Password Protected ConfigurationHttp Firmware Upgrade and backup Dhcp Server SupportPhysical Details SystemDefault Settings LED Action ConditionBasic Setup Overview ProcedureConfiguring the XC-DPG503 for your LAN ProcedureNo Response? Configuring the XC-DPG503 for your LAN Connecting two broadband modems Installation Diagram for XC-DPG503Configuring for Internet Access Settings Primary Setup Connection ModeConnection Type Address InfoConfigure PCs on your LAN TCP/IP SettingsInternet Access OverviewFor Apple Clients For Linux ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Health Check Auto Dialup Bridge Mode Port OptionsSettings Load Balance Load BalanceSettings Advanced PPPoE Advanced PPPoESettings Advanced Pptp Advanced PptpAdvanced Setup Host IP Host IPSettings Virtual Server Virtual ServersVirtual Servers Settings Custom Virtual Servers Custom Virtual ServersCustom Virtual Servers Server ListSettings Special Applications Special ApplicationsSpecial Application To use the Dynamic DNS Feature Settings Dynamic DNSDynamic DNS Dynamic DNSMulti DMZ & UPnP For Dynamic IPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features Using Remote Web-based Setup HTTP// Internet IP Address of the XC-DPG503Security Management Firewall ExceptionAccess Filter Settings Block URLSettings Access Filter Block URLSettings Session Limit Session Limit & Firewall ExceptionSession Limit QoS Configuration VPN Configuration IPSec Global Settings IPSec Global SettingPolicy Setup VPN Policy SetupKey Management Management Assistant System InformationTrap Targets Management Assistant Syslog ConfigurationMessage Status Using the Tftp Utility Recommended Updating the Firmware Backup your configurationTo save the XC-DPG503 Configuration to a file Http Upgrade Firmware Uploading the FirmwareTo upload the firmware to the router Restoring Saved ConfigurationOperation & Status System StatusOperation & Status Advanced LAN Configuration Existing Dhcp ServerAdvanced LAN Configuration Static RoutingConfiguring other Routers on you LAN 192.168.2.0255.255.255.0 192.168.1.100Dimensions Operating TemperatureStorage Temperature External Power AdapterTCP/IP Settings Checking TCP/IP Settings Windows 9x/MEUsing Dhcp Using Specify an IP AddressChecking TCP/IP Settings Windows Using a fixed IP Address Use the following IP AddressChecking TCP/IP Settings Windows XP Figure G. Network Configuration Windows XPTroubleshooting Overview

XC-DPG503 specifications

The XiNCOM XC-DPG503 is a versatile and advanced dual WAN VPN router designed to meet the demands of small to medium-sized businesses looking for robust internet connectivity and reliable security features. Its distinguishing characteristics make it an excellent choice for organizations requiring seamless redundancy and high-speed performance.

One of the most notable features of the XC-DPG503 is its dual WAN capability. This allows users to connect two different internet service providers simultaneously, ensuring uninterrupted connectivity. In case one connection fails, the router can automatically failover to the secondary WAN link, enhancing network reliability and uptime. This feature is particularly beneficial for businesses that cannot afford downtime due to internet connectivity issues.

The XC-DPG503 supports various VPN protocols, such as IPSec and PPTP, which enable secure remote access for employees and secure site-to-site connections. With built-in VPN support, users can establish encrypted connections over the public internet, allowing sensitive data to be transmitted safely. This level of security is essential for businesses handling confidential information.

Another characteristic of the XC-DPG503 is its comprehensive firewall capabilities, which protect the internal network from external threats. It includes features like Stateful Packet Inspection (SPI), Denial of Service (DoS) protection, and content filtering, helping to safeguard the network against various cyber threats.

Performance-wise, the XC-DPG503 comes equipped with a robust processor and ample memory, allowing it to handle multiple connections and data-intensive applications simultaneously without compromising speed and efficiency. With support for Gigabit Ethernet ports, it ensures high-speed LAN connectivity, accommodating the high bandwidth requirements of modern enterprises.

The router also features an easy-to-use web-based management interface. This user-friendly platform allows administrators to configure settings, monitor network performance, and manage security policies efficiently. Additionally, it supports remote management, enabling IT staff to oversee the network without being physically present.

Designed for scalability, the XiNCOM XC-DPG503 is an ideal solution for growing businesses. Its advanced features, security protocols, and dual WAN capability make it a reliable choice for organizations looking to maintain high levels of productivity while ensuring a secure networking environment. Overall, the XC-DPG503 stands out with its combination of performance, security, and ease of management, making it an invaluable asset for contemporary business networks.