XiNCOM XC-DPG503 manual Physical Details, System

Page 7

Physical Details

Front Panel:

Twin WAN VPN Gateway

XC-DPG503

Operation of the Front Panel LEDs is as follows:

System:

Power

OFF - No Power.

ON - Normal Operation

Status

OFF - Normal Operation

ON - Firmware not loaded or Hardware Error

Blinking - Data in/out

WAN:

LINK/ACT

ON - Physical connection to the Broadband modem on WAN port 1/2 established. OFF - No physical connection on WAN port 1/2.

10M/100M

ON - Physical connection using 100BaseT on WAN port 1/2 established. OFF - 10BaseT connection or no connection on WAN port 1/2.

LAN:

LINK/ACT

ON - Physical connection or data in/out.

OFF - No physical connection.

10M/100M

ON - The corresponding LAN port is using 100BaseT.

OFF - 10BaseT connection on the corresponding LAN port or no connection.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents
Twin WAN VPN Gateway Table of Contents QoS Configuration VPN Configuration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Dhcp Server Support Easy SetupPassword Protected Configuration Http Firmware Upgrade and backupSystem Physical DetailsLED Action Condition Default SettingsOverview Procedure Basic SetupProcedure Configuring the XC-DPG503 for your LANNo Response? Configuring the XC-DPG503 for your LAN Installation Diagram for XC-DPG503 Connecting two broadband modemsAddress Info Configuring for Internet AccessSettings Primary Setup Connection Mode Connection TypeOverview Configure PCs on your LANTCP/IP Settings Internet AccessTo act as a Dhcp Client recommended For Apple ClientsFor Linux Clients Fixed IP AddressAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Settings Virtual ServerVirtual Servers Server List Settings Custom Virtual ServersCustom Virtual Servers Custom Virtual ServersSpecial Applications Settings Special ApplicationsSpecial Application Dynamic DNS To use the Dynamic DNS FeatureSettings Dynamic DNS Dynamic DNSPrivate IP Address Multi DMZ & UPnPFor Dynamic IP Select the desired WAN portAdvanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG503 Using Remote Web-based SetupFirewall Exception Security ManagementBlock URL Access FilterSettings Block URL Settings Access FilterSession Limit & Firewall Exception Settings Session LimitSession Limit QoS Configuration VPN Configuration IPSec Global Setting IPSec Global SettingsVPN Policy Setup Policy SetupKey Management System Information Management AssistantTrap Targets Syslog Configuration Management AssistantMessage Status Updating the Firmware Backup your configuration Using the Tftp Utility RecommendedTo save the XC-DPG503 Configuration to a file Restoring Saved Configuration Http Upgrade FirmwareUploading the Firmware To upload the firmware to the routerSystem Status Operation & StatusOperation & Status Existing Dhcp Server Advanced LAN ConfigurationStatic Routing Advanced LAN Configuration192.168.1.100 Configuring other Routers on you LAN192.168.2.0 255.255.255.0External Power Adapter DimensionsOperating Temperature Storage TemperatureUsing Specify an IP Address TCP/IP SettingsChecking TCP/IP Settings Windows 9x/ME Using DhcpUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Configuration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting