XiNCOM XC-DPG503 manual Basic Setup, Overview Procedure

Page 9

Chapter 2 - Basic Setup

XC-DPG503

Twin WAN VPN Gateway

Chapter Contents

•Overview

•Procedure

1.Conﬁguring your LAN

2.Connecting Broadband Modems

3.Conﬁguring for Internet Access

4.Conﬁguring your LAN PCs

Overview

Basic setup of your XC-DPG503 wil involve the following steps:

1.Connect the XC-DPG503 to one (1) PC and conﬁgure it to your existing LAN.

2.Connecting one or two Broadband Modems to your XC-DPG503.

3.Conﬁguring the XC-DPG503 for Interent Access.

4.Conﬁguring all PCs on your LAN to use the XC-DPG503.

Requirements:

•One or two Broadband modems (T1, xDSL, Cable, and Satillite) with an active account from your ISP(s).

•Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.

•TCP/IP network protocol must be installed on all PCs.

CAT5 Ethernet Cables

Broadband Modems

TCP/IP Enabled PCs

9

Image 9

Contents

Twin WAN VPN Gateway Table of Contents QoS Conﬁguration VPN Conﬁguration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Conﬁguration Easy SetupHttp Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Procedure Basic SetupConfiguring the XC-DPG503 for your LAN ProcedureNo Response? Configuring the XC-DPG503 for your LAN Installation Diagram for XC-DPG503 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPSettings Virtual Server Virtual ServersVirtual Servers Custom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSettings Special Applications Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG503 Using Remote Web-based SetupFirewall Exception Security ManagementSettings Block URL Access FilterSettings Access Filter Block URLSettings Session Limit Session Limit & Firewall ExceptionSession Limit QoS Conﬁguration VPN Conﬁguration IPSec Global Setting IPSec Global SettingsVPN Policy Setup Policy SetupKey Management Management Assistant System InformationTrap Targets Management Assistant Syslog ConﬁgurationMessage Status Using the Tftp Utility Recommended Updating the Firmware Backup your conﬁgurationTo save the XC-DPG503 Conﬁguration to a ﬁle Uploading the Firmware Http Upgrade FirmwareTo upload the ﬁrmware to the router Restoring Saved ConﬁgurationSystem Status Operation & StatusOperation & Status Existing Dhcp Server Advanced LAN ConﬁgurationStatic Routing Advanced LAN Configuration192.168.2.0 Conﬁguring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a ﬁxed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Conﬁguration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting