3M 800r3 Main Air Pressure Gauge, Latching Knob, Upper Taping Head Frame -Figure, Box Exit Cams

Page 21

Operation (Continued)

Figure 3-5 – Air Regulator, Upper Taping Head Frame

9Air Pressure Regulator, Upper Taping Head Frame –Figure3-5

Set nominally to control "down" pressure against box. The factory set point is 15 PSIG [1 bar]. The regulator setting is adjusted as necessary to allow free movement of boxes through taping heads while maintaining boxes flaps in fully closed position. Decreasing air pressure will increase down pressure on boxes while increasing air pressure will decrease down force on boxes.

For boxes which are fully packed with products that support the top flaps, the adjustment of this regulator is not critical since the boxes can support the pressure of the upper frame at a wide range of regulator settings. However, if under-filled or fragile boxes are sealed, this regulator is used to set the upper frame at the minimum setting while still maintaining adequate closure of boxes.

The air regulator is adjusted by pulling out to adjust and pushing in to lock the setting as shown in Figure 3-5.

10Main Air Pressure Gauge

Indicates main air regulator pressure setting. Air regulator should be adjusted so gauge reads 6.5 bar gauge pressure [95 PSIG].

11Latching Knob, Upper Taping Head Frame –Figure 3-6

The mechanical latch is provided to hold the upper frame at the fully raised position for tape threading and maintenance.

Figure 3-6 – Latching Knob, Upper Taping Head Frame

To raise and latch the upper frame:

1.Push and hold the upper frame raising switch "A".

2.Push and hold latching knob "B".

3.Release switch "A".

4.Release knob "B".

5.Shut off air supply.

To release and lower the upper frame:

1.Turn on air supply.

2.Push and release switch "A".

WARNING – Do not put hands beneath upper taping head frame

when upper frame lowers to its rest position. Severe personal injury could result.

12Indicator, Air Pressure

An "Optical" Warning Indicator for the compressed air circuit of the machine is located on the upper taping head frame just behind the red "Stop" button. When indicator is "Red", air circuit is on.

13Box Exit Cams

These cams, when tripped by exiting box, signal drive belts to return to their fully open (rest) position.

16

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 3M-Matic To Our Customers Replacement Parts and Additional ManualsTo Our Customers Table of Contents Section II AccuGlide II STD 3-Inch Taping Head 3M-MaticTM800r3 Random Case Sealer, Type Intended Use800r3 Contents Knife Warning Label Important SafeguardsOperating Notice Label 10 -Air Pressure Gage Label 11 Knife Warning Label 12 Tape Threading LabelSpecifications Box Size Box Weight and Size Capacities WeightMaximum Machine Dimensions MinimumInstallation and Set-Up Receiving And HandlingUncrated BOX Size Capacity of Case Sealer Pneumatic Connection Case Sealer Components OperationMain Air On/Off Valve/Pressure Regulator/ Filter Figure Controls, Valves and Switches Electrical On/Off SwitchDoor Air Pressure Regulator, Box Drive Belt Centering -4Air Pressure Gauge, Upper Taping Head Frame Main Air Pressure Gauge Latching Knob, Upper Taping Head Frame -FigureBox Exit Cams See Section II, pages 7 Operation Box SealingLubrication MaintenanceBox Drive Belt Left Side View Infeed End Box Drive Assembly, Infeed End Personnel could result Circuit Breaker Knife Replacement, Taping HeadAdjustments Taping Head Adjustments Refer to SectionPersonnel could result Drive Belt Tension Special Set-Up Procedure Column Re-Positioning This page is Blank Troubleshooting Guide Problem Cause Correction TroubleshootingTroubleshooting 800r3 Case Sealer Operating Sequence Electrical Diagram Electrical/Pneumatic DiagramsPage Pneumatic Diagram Page This page is Blank Parts and Service Information Part Number Option/Accessory Options/AccessoriesReplacement Parts Illustrations and Parts Lists This page is Blank 800r3 Random Case Sealer Frame Assemblies 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Safety and Information Labels Ref. No 3M Part No Description Qty 800r3 Safety and Information Labels

800r3 specifications

The 3M 800R3 is a cutting-edge respiratory protection system designed for those who work in environments where they may encounter hazardous airborne contaminants. This respiratory mask is part of 3M’s extensive line of personal protective equipment and is engineered for comfort, performance, and reliability.

One of the main features of the 3M 800R3 is its advanced filter technology, which ensures effective filtration of organic vapors and particulates. It is equipped with a P100 filter, which provides a minimum efficiency of 99.97% against airborne particles, making it ideal for use in various industries, including construction, healthcare, and chemical processing. This level of protection is essential for workers who need to protect their respiratory systems from harmful substances.

The 3M 800R3 employs a unique multi-layered filtration system. This includes an activated carbon layer that absorbs certain gases and vapors, providing an added level of safety. This technology enhances the overall user experience by reducing the inhalation of noxious chemicals, thereby ensuring better worker health and increasing productivity.

Comfort and fit are paramount in any respiratory protective system, and the 3M 800R3 does not disappoint. The mask features an ergonomic design with adjustable straps, allowing users to achieve a secure and comfortable fit. Its lightweight material reduces fatigue during extended wear, making it suitable for long shifts in demanding environments. Additionally, the flexible facepiece conforms to various face shapes, ensuring a good seal without compromising comfort.

Another notable characteristic of the 3M 800R3 is its versatility. It can be used with a range of cartridges and filters, allowing users to customize their level of protection based on specific job requirements. This adaptability makes it an excellent choice for workers who face different hazards throughout their workday.

The 3M 800R3 is also designed for easy maintenance and cleaning. Its washable components ensure longevity and hygiene, while the replaceable filters reduce waste and operating costs, making it an economical choice for employers and safety professionals.

In summary, the 3M 800R3 is a formidable respiratory protection device that combines advanced filtration technology, comfort, and versatility. It is an essential tool for safeguarding respiratory health in various workplaces, ensuring users have the necessary protection from airborne hazards.
Top Page Image Contents