3M 800r3 manual Box Sealing, Operation

Page 23

Operation (Continued)

Box Sealing

1.Turn main air valve "On".

2.Push electrical switch "On" to start drive belts.

3.With access door closed, feed boxes to machine at minimum 460 mm [18 in] intervals.

WARNING – Keep hands away from drive belts when feeding boxes to

machine. Push boxes from the end only, DO NOT push with hands on any corners of the box.

Operator pushes box against raising switch on upper frame assembly, as shown in Figure 3-7, causing the upper frame (taping head) to be raised above the box.

4.Box is then pushed under belt centering roller switch (Figure 3-8), which closes drive belts and conveys box through machine.

Once the box is conveyed from under the upper taping head, the upper frame assembly returns to its rest position, ready for insertion of next box. Also, box exiting machine, trips box exit cams which signal drive belts to return to their full open (rest) position.

5.Turn air and electrical supplies "Off" when machine is not in use.

6.Reload and thread tape as necessary.

7.Be sure machine is cleaned and lubricated according to recommendations in "Maintenance" section of this manual.

Notes

1.Machine or taping head adjustments are described in "Adjustments", Section I for machine or Section II for taping heads.

2.Box drive motors are designed to run at a moderate temperature of 40°C [104°F]. In some cases, they may feel hot to the touch.

Figure 3-7 – Operation

Figure 3-8 – Operation 8888 – Operation

Box Jam

If a box should jam or there is a need to shut the machine off with the upper head assembly in the up position, the E-Stop button can be pressed or the guard door can be opened. Either function will automatically raise the upper head assembly to its highest position and the air pressure will be exhausted from the belt assemblies. The box can be removed and the tape should be checked to insure that it is threaded properly. When the E-Stop is pulled up or the door closed the upper head assembly will lower to the lowest position.

18

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 3M-Matic To Our Customers Replacement Parts and Additional ManualsTo Our Customers Table of Contents Section II AccuGlide II STD 3-Inch Taping Head 3M-MaticTM800r3 Random Case Sealer, Type Intended Use800r3 Contents Knife Warning Label Important SafeguardsOperating Notice Label 10 -Air Pressure Gage Label 11 Knife Warning Label 12 Tape Threading LabelSpecifications Box Size Box Weight and Size Capacities WeightMaximum Machine Dimensions MinimumUncrated Installation and Set-UpReceiving And Handling BOX Size Capacity of Case Sealer Pneumatic Connection Case Sealer Components OperationMain Air On/Off Valve/Pressure Regulator/ Filter Figure Controls, Valves and Switches Electrical On/Off SwitchAir Pressure Gauge, Upper Taping Head Frame DoorAir Pressure Regulator, Box Drive Belt Centering -4 Box Exit Cams Main Air Pressure GaugeLatching Knob, Upper Taping Head Frame -Figure See Section II, pages 7 Operation Box SealingLubrication MaintenanceBox Drive Belt Left Side View Infeed End Box Drive Assembly, Infeed End Personnel could result Circuit Breaker Knife Replacement, Taping HeadPersonnel could result Drive Belt Tension AdjustmentsTaping Head Adjustments Refer to Section Special Set-Up Procedure Column Re-Positioning This page is Blank Troubleshooting Guide Problem Cause Correction TroubleshootingTroubleshooting 800r3 Case Sealer Operating Sequence Electrical Diagram Electrical/Pneumatic DiagramsPage Pneumatic Diagram Page This page is Blank Parts and Service Information Part Number Option/Accessory Options/AccessoriesReplacement Parts Illustrations and Parts Lists This page is Blank 800r3 Random Case Sealer Frame Assemblies 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Ref. No 3M Part No Description 800r3 Random Case Sealer Safety and Information Labels Ref. No 3M Part No Description Qty 800r3 Safety and Information Labels

800r3 specifications

The 3M 800R3 is a cutting-edge respiratory protection system designed for those who work in environments where they may encounter hazardous airborne contaminants. This respiratory mask is part of 3M’s extensive line of personal protective equipment and is engineered for comfort, performance, and reliability.

One of the main features of the 3M 800R3 is its advanced filter technology, which ensures effective filtration of organic vapors and particulates. It is equipped with a P100 filter, which provides a minimum efficiency of 99.97% against airborne particles, making it ideal for use in various industries, including construction, healthcare, and chemical processing. This level of protection is essential for workers who need to protect their respiratory systems from harmful substances.

The 3M 800R3 employs a unique multi-layered filtration system. This includes an activated carbon layer that absorbs certain gases and vapors, providing an added level of safety. This technology enhances the overall user experience by reducing the inhalation of noxious chemicals, thereby ensuring better worker health and increasing productivity.

Comfort and fit are paramount in any respiratory protective system, and the 3M 800R3 does not disappoint. The mask features an ergonomic design with adjustable straps, allowing users to achieve a secure and comfortable fit. Its lightweight material reduces fatigue during extended wear, making it suitable for long shifts in demanding environments. Additionally, the flexible facepiece conforms to various face shapes, ensuring a good seal without compromising comfort.

Another notable characteristic of the 3M 800R3 is its versatility. It can be used with a range of cartridges and filters, allowing users to customize their level of protection based on specific job requirements. This adaptability makes it an excellent choice for workers who face different hazards throughout their workday.

The 3M 800R3 is also designed for easy maintenance and cleaning. Its washable components ensure longevity and hygiene, while the replaceable filters reduce waste and operating costs, making it an economical choice for employers and safety professionals.

In summary, the 3M 800R3 is a formidable respiratory protection device that combines advanced filtration technology, comfort, and versatility. It is an essential tool for safeguarding respiratory health in various workplaces, ensuring users have the necessary protection from airborne hazards.
Top Page Image Contents