Control with Hdmi Hdavi Control | Panasonic TC-32LX60C, TC-32LX60L

Control with HDMI “HDAVI Control™”

•Set up the equipment to enable this function. Read the manual for the equipment.

•Switch the TV unit on again with the equipment on when connection or setup is changed.

•This function may not work normally depending on the equipment condition.

•The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.

•Image or sound may not be available for the first few seconds when the playback starts.

•Image or sound may not be available for the first few seconds when Input mode is switched.HDMI connections to some Panasonic equipment allow you to enjoy easy playback.

HDMI connection

HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality sound by connecting the TV unit and the equipment.

HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set-top box or a DVD player, can be connected

•HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard.

•If the external equipment has only a DVI output, connect to the HDMI terminal via a DVI to HDMI adapter cable (*2).

•When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.

•Audio settings can be made on the “HDMI in” menu screen. (p. 12-13) Applicable audio signal sampling frequencies (L.PCM):to the HDMI connector using an HDMI compliant (fully wired) cable.

48 kHz, 44.1 kHz, 32 kHz

(*1): The HDMI logo is displayed on an HDMI-compliant equipment.

(*2): Enquire at your local digital equipment retailer shop.

Caution

•Use with a PC is not assumed.

•All signals are reformatted before being displayed on the screen.

•If the connected equipment has an aspect adjustment function, set the aspect ratio to “16:9”.

•This HDMI connector is “type A”.

•Equipment having no digital output terminal may be connected to the input terminal of either “COMPONENT”, “S-VIDEO”, or “VIDEO” to receive analog signals.

•The HDMI input terminal can be used with only the following image signals: 480i, 480p, 720p and 1080i Match the output setting of the digital equipment.

•For details of the applicable HDMI signals, see below.

Input signals that can be displayed

* Mark: Applicable input signal for Component (Y, PB, PR) and HDMI

		horizontal	vertical	COMPONENT	HDMI
		frequency (kHz)	frequency (Hz)	COMPONENT	HDMI
		frequency (kHz)	frequency (Hz)
525 (480)	/ 60i	15.73	59.94	*	*
525 (480)	/60p	31.47	59.94	*	*
750 (720)	/60p	45.00	59.94	*	*
1,125 (1,080) /60i		33.75	59.94	*	*

Note

•Signals other than those shown above may not be displayed properly.

•The above signals are reformatted for optimal viewing on your display.

Technical Information

FAQs, etc.