Panasonic WV-LC1710 operating instructions Setting of PC Input, 1280x1024@60Hz

Setting of PC Input

1.Display the Video Adjustment Menu. (Refer to page 15)

PC	IN		1280x1024@60Hz
BRIGHT			0
CONTRAST			0
H-POSITION			0
V -POSITION			0
CLOCK			0
PHASE			0
COLOR TEMP			USER COLOR
USER COLOR		R	20
USER COLOR		G	20
USER COLOR		B	20
OSD H-POSITION			0
OSD V-POSITION			0
VOLUME			0
LANGUAGE			ENGLISH
NORMAL	SETTINGS

2.Set the BRIGHT, CONTRAST, VOLUME, and LANGUAGE parameters. Please refer to page 16 for the operation method.

3.Move the cursor to each setting parameter listed below with the ￿PIP or ￿POS button, then adjust the level of the selected item with the - or + button.

Item Effect Indicator

H-POSITION

Right Left

V-POSITION

Down Up

CLOCK

Contract Expand

5.Move the cursor to either USER COLOR R, USER COLOR G, or USER COLOR B parameter in the menu with the ￿PIP or

￿POS button, then adjust the red, green, or blue color for color temperature.

- : Decreases the red, green, or blue color.

+ : Increases the red, green, or blue color.

6.To reset the monitor to the default settings, move the cursor to the NORMAL SETTINGS with the ￿PIP or ￿POS button, then press the - or + button to restore the default settings.

When - or + button is pressed, NORMAL SETTINGS is dis- played and then, AUTO TUNING is displayed on the center of the screen as shown below.

Note:

•During reset, setting parameters of the Video Adjustment Menu only are being reset.

NORMAL SETTINGS AUTO TUNING

PC IN		1280x1024@60Hz
BRIGHT		-12
CONTRAST		8
H-POSITION		5
V -POSITION		5
CLOCK		4
PHASE		7
COLOR TEMP		6500K
USER COLOR	R	15
USER COLOR	G	15

PHASE

OSD H-POSITION

OSD V-POSITION

Note:

Right Left

Left Right

Up Down

USER COLOR B	15
OSD H-POSITION	1
OSD V-POSITION	20
VOLUME	2
LANGUAGE	ENGLISH
NORMAL SETTINGS

PC IN	1280x1024@60Hz
BRIGHT	0
CONTRAST	0
H-POSITION	5

•Each setting parameter can be set at a range of -20 ~ 20. However, there are cases that no changes in set value even when - or + button is pressed.

4.Move the cursor to the COLOR TEMP parameter with the

￿PIP or ￿POS button, then select color temperature of dis- play with - or + button.

Set the RGB in step 5 in case USER COLOR is selected. USER COLOR : Pictures are displayed in specified

	color temperature.
9300K	: Pictures are displayed in bluish
	color temperature.
6500K	: Pictures are displayed in reddish
	color temperature.

V -POSITION		5
CLOCK		4
PHASE		7
COLOR TEMP		USER COLOR
USER COLOR	R	20
USER COLOR	G	20
USER COLOR	B	20
OSD H-POSITION		1
OSD V-POSITION		20
VOLUME		2
LANGUAGE		ENGLISH
NORMAL SETTINGS

18