Panasonic WV-LC1710 Installation, Removing Stand in the Monitor, Mounting into the Rack

Page 9

INSTALLATION

Cautions:

•The installation described below should be made by qualified service personnel or system installers.

•During installation, remove all connected cables and turn off the power of the monitor.

Removing Stand in the Monitor

Before installing this monitor on the wall or in the rack, the monitor stand shall be removed.

Remove two M4 screws to remove the stand cover.

Remove the stand assembly by removing four M4 screws from the stand.

Remove the stand arm by removing the three remaining

M4 screws.

Stand Arm

Mounting Screws

(M4)

Stand Cover

Mounting Screws

(M4)

Stand

Mounting Screws

(M4)

Mounting into the Rack

To install this monitor in rack, use the Rack Mount Bracket WQ-LM171 (optional) and rack mounting screws (procured locally).

Mounting Screws
(M3×8)
Mounting	Upper Rack
Screws	Mount Bracket
(M4×12)

EIA Rack

Rack Mounting Screws

Remove four screws on both side panels.

Mount the rack mount brackets to the sides of the moni- tor.

Fix the rack mount brackets by using four supplied screws (M4×12).

Mount the upper rack mount bracket on the upper side of the monitor.

Fix the upper rack mount bracket by using two supplied screws (M3×8).

Install securely the monitor in the rack using eight screws (procured locally).

(procured locally)

Mounting Screws (M4×12)

Mounting Screws (M3×8)

9

Image 9

Contents Français English Video MonitorEnglish Version English Important Safety InstructionsLimitation of Liability Disclaimer of WarrantyContents Features PrecautionsPreface Front View Rear View Major Operating Controls and Their FunctionsVesa Timing Data Chart for PC inputInstallation Removing Stand in the MonitorMounting into the Rack Mounting on the Wall Connections Multiple Monitor Connection Connection with the Camera SiteConnection with the Digital Disk Recorder Connection with PCOnscreen Display Video Input StartupAudio Volume Control Displaying Video Adjustment Menu Displaying Video Adjustment MenuInput Signal Menu Title Standard 9300K6500K Normal Settings Video Ntsc 1280x1024@60Hz Setting of PC InputConnecting with WJ-HD300 Series Picture-in-Picture Mode MonitoringPhenomenon Cause What to do TroubleshootingVideo Monitor SpecificationsAC Adapter Standard AccessoriesFrançais Version FrançaiseInstructions DE Sécurité Importantes Déni DE Garantie Limitation DE ResponsabilitéTable DES Matières Fonctions PréfacePrécautions ’utiliser que l’adaptateur CA fourniVue de face Vue de dos Principales Commandes ET FonctionsTableau des données de synchronisation PC prises en charge Démontage du support du moniteur Montage sur bâtiMises en garde Montage au mur Raccords Raccord à plusieurs moniteurs Raccord à un site de camérasRaccord à un enregistreur de disques numériques Raccord à un PCAffichage à l’écran Entrée vidéo DémarrageCommande DE Volume Audio Signal en entrée Titre du menu Affichage DU Menu DE Réglage VidéoAffichage du menu de réglage vidéo Norme Afficher le menu de réglage vidéo. Se reporter à laReglages Moyens Video Ntsc Phase Configuration de l’entrée PCVisionnement en mode Image dans l’image Branchement Avec UN Appareil DE LA Gamme WJ-HD300POS Symptôme Cause Action à prendre Résolution DES ProblèmesLa touche Input Select ProcessingMoniteur vidéo Caractéristiques TechniquesAdaptateur CA Accessoires StandardP1005-0 PA5D0010BN Imprimé aux Philippines