PREFACE
This monitor is a 17" type LCD Monitor, using a motion adaption IP conversion circuit and Y/C separation circuit for high definition and high resolution of picture display.
FEATURES
•
•Selectable inputs, including Composite Video,
•Automatically switchable NTSC and PAL system.
•PC display capacity which can support VGA (640 × 480) ~ SXGA (1280 × 1024) resolutions. Picture size and position can be auto- matically adjusted.
•One audio input and output with built in maximum speaker output of 0.5 W.
•Onscreen setup menu.
•
•Metal cabinet casing. It can be mounted in an EIA standard rack using an optional rack mount bracket.
•The mounting holes for wall mount located on the rear side of the monitor comply with VESA standard. It can be mount- ed in the wall by installing a commercialized wall mount. VESA: Video Electronics Standards Association
PRECAUTIONS
•Refer all work related to the installation of this product to qualified personnel or system installers.
•Do not block the ventilation slots on the cover.
To prevent the appliance from overheating, place it at least 5 cm {2 inches} away from the wall.
•Do not drop metallic parts through the slots.
This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service.
•Do not attempt to disassemble the appliance.
To prevent electric shock, do not remove screws or covers. There are no
•Handle the appliance with care.
Do not strike or shake it, as this may damage the appliance.
•Do not expose the appliance to rain or moisture nor try to operate it in wet areas.
Take immediate action if the appliance becomes wet. Turn the power off and refer to qualified service personnel.
Moisture may damage the appliance and also cause electric shock.
•Do not operate the appliance beyond its specified tem- perature, humidity or power source ratings.
Use the appliance at temperatures within 0 °C ~ +40 °C {32 °F ~ 104 °F} and humidity below 90 %.
The input power source for this appliance is 100 V AC to 240 V AC, 50/60 Hz with AC Adapter.
•Do not use strong or abrasive detergents when cleaning the appliance body.
Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently. Afterwards, wipe the remained part of the detergent in it with a dry cloth.
•The surface of the display panel is applied by special coating.
Do not point hard objects and wipe by abrasive material. It can cause scratches and damages on the display panel.
•The display panel is made from a very precise technol- ogy.
Some bright and dark spots may exist on the screen. It is operat- ing normally if there are 99.99 % active pixels.
•Use the supplied AC Adapter. Other AC Adapters cannot be used.
•When turning off the power supply of AC Adapter, unplug the power supply cord or cut the power supply through the breaker in the panel board connecting to this equipment. When installing this equipment again, place where the power sup- ply plug socket and breaker easily be reached.
6