Panasonic TH-50PF9UK Picture Adjustments, Standard, Dynamic, Super Cinema

Page 24

PICTURE Adjustments

1

2

Press to display the PICTURE menu.

Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

PICTURE		1/2

NORMALIZE	NORMAL

PICTURE MENU		STANDARD

PICTURE		25
PICTURE		25

BRIGHTNESS		0
BRIGHTNESS		0

COLOR		0
COLOR		0

TINT		0

SHARPNESS		5

PICTURE	2/2
COLOR TEMP	NORMAL
COLOR MANAGEMENT	OFF

ADVANCED SETTINGS

ON

Press to select “ON”.

Press to enter

Advanced Settings.

ADVANCED SETTINGS ON

Enables fine picture adjustment at a professional level (see next page).

ADVANCED SETTINGS
NORMALIZE	NORMAL
BLACK EXTENSION		0
INPUT LEVEL		0
W/B HIGH R		0
W/B HIGH B		0
W/B LOW R		0
W/B LOW B		0
GAMMA		2.2
AGC		OFF

ADVANCED SETTINGS OFF

Displays images with settings of the

PICTURE menu.

Press the left or right button to switch between modes.

STANDARD DYNAMIC

SUPER CINEMA

CINEMA

STANDARD

For viewing in standard (evening lighting) environments. This menu selects the normal levels of BRIGHTNESS and PICTURE.

DYNAMIC

For viewing in brighter environments.

This menu selects higher than normal levels of BRIGHTNESS and PICTURE.

CINEMA

Ideal for movies.

SUPER CINEMA

Displays velvety picture.

Note:

If you would like to change the picture and color of the selected PICTURE menu to something else, adjust using the items in the PICTURE menu. (see next page)

Press the left or right button to switch between modes.

NORMAL COOL WARM

COLOR MANAGEMENT ON

Enables vivid color adjustment automatically.

Helpful Hint ( /

NORMALIZE

Normalization)

While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

24

Image 24

Contents High Deﬁnition Plasma Display Operating InstructionsEnglish Model No. TH-50PF9UKRisk of Electric Shock Do not Open Important Safety Instructions Table of Contents FCC Caution Canadian NoticeTrademark Credits Safety Precautions When using the Plasma DisplayMaintenance Safety Precautions / MaintenanceSetup AC Power Supply CordAccessories Accessories SuppliedRemote Control Batteries Connections SpeakersAC cord ﬁxing DVI-D COMPONENT/RGBSignal Names for Mini D-sub 15P Connector PC Input Terminals connectionConnections Command Serial Terminals connectionCommunication parameters Basic format for control dataComponent / RGB connection & RGB signal R, G, B DVI-D Input ConnectorSignal Name DVI-D connectionPower on / OFF Connecting the AC cord plug to the Plasma DisplayConnecting the plug to the Wall Outlet Basic Controls OFFBasic Controls Advanced Settings On-Screen Menu DisplaysTime / Power OFF Time On Time / Power OFFOn-Screen Menu Displays Selecting the input signal Initial selectionsSelecting the On-Screen Menu Language INPUT1 INPUT2 INPUT3 PCAspect Controls Normal Zoom FullNormal Full Adjusting POS. /SIZE POS / V-SIZE / DOT Clock / Clock PhasePixel Mode Adjusting POS. /SIZE Clock PhasePOS SizeMulti PIP Advanced PIP Sub screen Main screenPicture Adjustments StandardDynamic CinemaAdvanced Settings Picture AdjustmentsSound Adjustment MuteDigital Zoom Display the Operation GuideSelect the magniﬁcation required for the enlarged display Return to normal display quit Digital ZoomPresent Time Setup Press to set up Present Time of DAYPress to select Set SET UP Timer Display the SET UP Timer Screen Press to selectPower on Time / Power OFF Time Press to select Power on FunctionMode selection Start settingScreensaver For preventing after-images Negative / Scroll selectionSetup of Screensaver Time Press to display the SET UP menuReduces screen after-image Screensaver For preventing after-imagesSide BAR Adjust OFF Dark MID BrightPress to exit from Screensaver Reduces power consumption Customizing the Input labelsAddition sign Selected Input SET UP for Multi Display How to setup Multi DisplayGroup of 4 2 × Group of 9 3 × Group of 16 4 × Press to select on or OFFSET UP for Multi Display Press to select Seam Hides VideoPress to select OFF, on Display Number locations for each arrangement ExamplesSeam Hides Video Setting ID Remote Control FunctionID remote control button operation ID CancellationSET UP for Input Signals Component / RGB in Select3D Y/C Filter For Ntsc AV images Component RGBSET UP for Input Signals Color System / Panasonic AutoPulldown / Video NR Color SystemSetting RGB sync signal SyncFREQ. kHz / V-FREQ. Hz Displays the H Horizontal / V Vertical frequenciesOptions Adjustments FunctionOptions Adjustments Off Initial VOL Sets normal volume LevelNormalization Menu & EnterShipping condition Troubleshooting Plasma Display panelDVI-D/COMPONENT/RGB/PC input signals DVI-DSpeciﬁcations TH-50PF9UKLimits and Exclusions Customer’s Record Panasonic Broadcast & Television Systems CompanyExecutive Ofﬁce Panasonic Canada Inc