1. Introduction and Installation
LA telephone handset cannot be connected directly to this unit. To talk to the other party, please connect an extension telephone.
Designed to be used in Middle East, Malaysia, Asia, Australia, New Zealand, Africa and Latin America according to the location setting feature. The default setting is Middle East. To change the
location setting, see page 1 (feature #114).
Using network router/network hub
LWe recommend using network routers/network hubs (6) under secure network environments. Consult your network administrator for firewall settings, etc.
LThe warranty does not cover damage due to security problems or any disadvantages relating to it.
1.4 Turning the power switch ON
Turn the power switch to the ON position (1).
1
1.5 Dialling mode
Important:
LNot available when “AUSTRALIA” or “NEW ZEALAND” is selected in feature #114.
If you cannot dial, change this setting according to your telephone line service.
1{Menu}
2Press {#}{1}{2}{0} to display “DIALLING MODE”.
3Press {1} or {2} to select the desired setting. {1} “PULSE”: For rotary/pulse dial service. {2} “TONE” (default): For tone dial service.
4{Set}
5Press {Menu} to exit.
1.6Selecting the operation mode (Scan/Copy/Fax)
You can select the desired mode by pressing one of the following buttons.
–{Scan}: Select this mode when using the unit as a scanner.
–{Copy}: Select this mode when using the unit as a copier.
–{Fax}: Select this mode when using the unit as a fax machine.
1.7 Setting the original
1.7.1 Using the scanner glass
1
2
1Open the document cover (1).
2Place the document FACE DOWN on the scanner glass (2), aligning the top left of the document with the corner to which the m mark points.
3Close the document cover.
Detailed operating instructions are on the | 13 |