Panasonic KX-MC6020CX Connections, Unit is warming up. Wait for a while, Other party, Immediately

Page 21

 

3. Help

 

 

 

 

Display

Cause & Solution

PC FAIL OR BUSY

L The cable or the computer power cord is not connected correctly. Check the

 

connections.

 

L The software is not running on the computer. Restart the software and try

 

again.

 

 

PLEASE WAIT

L The unit is warming up. Wait for a while.

POLLING ERROR

L The other party’s fax machine does not offer the polling function. Check with

 

the other party.

REDIAL TIME OUT

L The other party’s fax machine is busy or has run out of recording paper. Try

 

again.

REMOVE DOCUMENT

L The document is jammed. Remove the jammed document.

 

L Attempted to send or copy a document longer than 600 mm using the

 

automatic document feeder. Press {Stop} to remove the document. Divide

 

the document into two or more sheets and try again.

 

 

RX MEMORY FULL

L The memory is full of received documents due to a lack of recording paper

 

or a recording paper jam. Install paper or remove the jammed paper.

 

L If feature #442 is set to ALWAYS,

 

– check the connection between the computer and the unit.

 

– check the computer is turned ON.

 

 

SCANNER POSITION ERROR

L There is something wrong with the scanner position. Turn the power switch

 

OFF, then ON. If the problem cannot be solved, contact our service

 

personnel.

 

 

SELF CALIBRATION

L The unit is changing the colour calibration. Wait for a while.

TRANSMIT ERROR

L A transmission error occurred. Try again.

TONER CARTRIDGE NOT

L The toner cartridge is not installed. Install it.

INSTALLED

 

TRAY #2 LEFT COVER

L The left cover of the optional input tray is open. Close it.

OPEN

 

WASTE TONER FULL

L The waste toner cartridge life is near its end. Replace the waste toner

b

cartridge as soon as possible.

CHANGE SUPPLIES

 

WASTE TONER NOT

L The waste toner cartridge is not installed. Install it.

INSTALLED

 

WASTE TONER REPLACE

L The waste toner cartridge life is finished. Replace the waste toner cartridge

b

immediately.

CHANGE SUPPLIES

 

Detailed operating instructions are on the CD-ROM.

21

Image 21
Contents Colour Laser Multi-Function Printer Model No. KX-MC6020CXEnvironment Set iMenuTrademarks CopyrightFor New Zealand users For Australian usersInstructions to customer Important information for Australian usersPower and ground connection For your safetyInstallation Important InformationInstallation and relocation Operating safeguardsImportant safety instructions Illegal copies For best performanceOperating instructions in the CD Table of Contents Quick Reference Guide Supplied accessories Accessory information ConnectionsToner cartridge high capacity Colour Model No. Part No Dialling mode Turning the power switch onSelecting the operation mode Scan/Copy/Fax Setting the originalHelp function Adjusting the volumeDate and time Your logoConfiguring the unit to access the LAN Installing Multi-Function StationSetting up automatically with a Dhcp server Introduction and Installation Printing from Windows applications Scanning from the unit Push ScanScanning from a computer Pull Scan Maintenance Cleaning the drum cartridge Cancelling the operationsHow to Use Using the automatic document feeder Activating FAX only modeHelp Error messages DisplayIf feature #442 is set to Always Installed. Install itInstall paper Unit is cooling down the fuser unit. Wait for a whileToner cartridge is not installed. Install it Transmission error occurred. Try againWaste toner cartridge is not installed. Install it ConnectionsPage Page N52