Siemens V4.0 manual Installing from CD-ROM with cdinst, Readme

Installing Advanced Server for UNIX Installing from CD-ROM with cdinst

4.6 Installing from CD-ROM with cdinst

Advanced Server for UNIX is only supplied on CD-ROM. The first steps for installation with the cdinst program are the same for all packages and are thus described here centrally. The other installation steps for the individual packages are given at the end of this section.

Carry out the following steps in the specified sequence:

1.Log on as system administrator root and insert the CD into the drive of the system from which you want to carry out the installation.

You can initiate the installation procedure from the UNIX command prompt.

2.Start the installation program with cdinst. The following dialog box is displayed:

1 Process Multi-Product CD-ROM

Server:local

CD-ROM device name: /dev/ios0/sdisk005s0

Remote pathname/

Local mountpoint: /cdrom0

Fill in the form and then press SAVE.

ÊPlace the cursor on CD-ROM device name and select the device name for the CD-

ROM drive with	F2	(CHOICES). Then select F3 (SAVE) to confirm your
input. A general message about the volume is then displayed.
Ê Acknowledge with	F8	(CONTINUE).

3. Mark the ASX set in the displayed list with the cursor and then press F2 (MARK)

and F3			(ENTER). The following message is then displayed:
		2
	info		- Display Detailed Product Information
	pkginfo		- Display Detailed Information on Packages
	README		- Display README Files
	install		- Install Products

Move the cursor to the item you want and press ENTER to select it.

ÊSelect info to display other information on the Advanced Server for UNIX V4.0 product, e.g. the name of the manufacturer, date of manufacture, version etc.

F6 (CANCEL) returns you to the displayed selection.

Product Manual U7613-J-Z815-6-76