Siemens V4.0 5.6 Configuration for shared client printer

Configuring Advanced Server for UNIX Configuration for shared client printer

Product Manual U7613-J-Z815-6-76

5.6 Configuration for shared client printer

In the case of the shared client printer, the print data is first accepted by the host spooler.

The print data is then transferred to the client whereby a distinction is made between

printing via the

●TSR program (Terminate and Stay Resident) clispool (or clipcach) for MS-DOS clients

with LAN Manager V2.2

●other servers and clients that can share the printers.

Shared client printer via TSR program

Advanced Server for UNIX reports after spooler acceptance on the relevant cl ient to the

TSR program (terminate and stay resident) clispool (or clipcache) that the print data is read y

for the PC printer under a specific sharename.

On the client, clispool sets up a connection with the informed server reso urce using the net

use command. The print data waiting on Advanced Server for UNIX is m ade available to the

PC program print via this connection.

Shared client printer via other servers and clients

For information on how to share a printer for the shared client printer on a server or

a client, please refer to the relevant manuals.

This section contains an example for setting up the printer queue for shared cl ient printer

and share it with Advanced Server for UNIX.

The Advanced Server for UNIX commands addclipr and delclipr are used for this.