Siemens V4.0 manual Netrun Service Parameters, MaxRuns Regdword 1 to

Advanced Server Registry	Netrun Service Parameters
Update REG_DWORD	0 or 1

If this value is set, the server synchronizes the user accounts database with the primary domain controller every time it starts. This keyword applies only to a backup domain controller and is ignored by the primary domain controller. Note that full synchronization is a very time-consuming operation.

Default: 0 (do not synchronize)

You can change the value of this key using the AS/U Administrator.

13.12 Netrun Service Parameters

The Registry path that contains entries for the Advanced Server Netrun service is as follows:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netrun\Parameters

MaxRuns REG_DWORD 1 to 10

Sets the maximum number of netrun requests that can run simultaneously.

Default: 3

RunPath REG_SZ Path up to 256 characters

Sets the path where programs accessible via the Netrun service are located. Only programs located in a runpath can be executed from a client or another server. Separate multiple path entries with colons (:).

Default: /tmp

Product Manual U7613-J-Z815-6-76