Siemens V4.0 manual OS/2 folder shows either no files or one file

Lanman.ini File			Parameters
	[lmxserver] Section Parameters
	Parameter	Description, Values, and Default Setting
	network	The network device names and NetBIOS name-
		passing type for the network(s) the server should use.
		Values: sets of four items separated by commas, each
		set of four separated from the next by a space. The
		following four items are in each set:
		1.	The device name for virtual circuit access.
		2.	The device name for datagram network access.
		3.	A digit identifying the NetBIOS interface convention
			used by the two devices above. Currently there is
			one convention compiled into the server:
			0 = RFC 1001/2 NetBIOS convention
		4.	The name of the transport provider, as returned by
			the nlsprovider system call. (For networks not
			configured to accept incoming connections through
			the UNIX system listener program, this can be any
			arbitrary string.)
		Default: /dev/inet/nb,/dev/inet/nbd,0,nbrfc
	newpoll	Specifies whether the new Reliant UNIX poll interface
		is to be used. If Reliant UNIX does not support the new
		poll, the old poll is used automatically. Default: yes
	os2searchfix	As a result of a AS/X fix for NT clients, problems have
		arisen since AS/X 4.0A1001 with OS/2 clients
		displaying files and directories. There is no final
		solution to the problem at present, which is why this
		parameter can be used to set the new or old behavior.
		Please read the readme files supplied to establish
		whether this parameter is still required in the current
		version.
		os2searchfix=no:
		–	OS/2 “folder" shows either no files or one file
		–	OS/2 "dir" in the DOS box shows at most 100 files
		os2searchfix=yes:
		–	Deleting a directory tree on Windows NT 4.0 with
			“deltree” does not delete all files.
		Default : no
			(continued)

Product Manual U7613-J-Z815-6-76