Siemens V4.0 manual Syntax

Lanman.ini File Syntax

14.1 Syntax

Within each section of the lanman.ini file, parameters are listed as follows:

●The name of each parameter is at the beginning of a line, followed by an equal sign and the value assigned to it: parameter=value.

●Comments start with a semicolon ( ; ). If a semicolon precedes a parameter on the line, that parameter is ignored.

●When a list of values is assigned to a parameter, the values are separated by commas: parameter=value,value,value, ... (There are some exceptions to this rule, which are noted in the description of the appropriate parameters.)

●When a value consists of a path, the path may be absolute, starting with / . If a path does not start with / , it is assumed to be relative to the lanman directory.

●If a numeric value begins with 0 it is octal; if it begins with X, it is hexadecimal; if it begins with a number from 1 to 9, it is decimal.

●When a parameter has no assigned value (nothing to the right of the equal sign), the value is 0 for a parameter that requires a number and null for a parameter that requires a character string.

●A null value is not valid for all parameters.

ÊTo change a parameter in the lanman.ini file

1.Use the srvconfig command to display default settings for the server parameters:

/var/opt/lanman/bin/srvconfig -p more

2.Edit the lanman.ini file using vi or a similar text editor. You may have to add a section heading to the file, for example [ lmxserver ]. You then need to add a “parameter=value” pair to the appropriate section of the lanman.ini file.

3.After you edit the file, you must stop and restart the server in order for the new values to take effect.

You also can use the srvconfig -scommand to set parameter values in the lanman.ini file, as follows:

/var/opt/lanman/bin/srvconfig -s “section,parameter=value”

For more information about the srvconfig command, type man srvconfig at the Advanced Server command prompt.

Product Manual U7613-J-Z815-6-76