Siemens V4.0 DeletedPrintJobTimeOnQ Regdword 0 infinity, DisableUpLevelPrinting Regdword 0 or

Advanced Server Registry Advanced Server Key Descriptions

DeletedPrintJobTimeOnQ REG_DWORD 0 - infinity

Specifies the time (in seconds) during which deleted print jobs will remain in the internal print job queue maintained by the lmx.srv process. This behavior can be disabled with the value 0, which means that the print job is not kept in the internal queue.

This setting avoids a problem printing from some versions of Microsoft Internet Explorer 4.0, which can lead to an NT client continuing to send RPC calls indefinitely because it could not access a print job that was already deleted.

This key is only evaluated if the AT&T Spooler ("ATTHPI" interface) is configured and the DisableUpLevelPrinting parameter is set to 0.

Default: 180 (3 minutes)

DisableUpLevelPrinting REG_DWORD 0 or 1

Specifies whether to disable or enable Windows NT-style printing.

If you chose to disable Windows NT-style printing during an upgrade procedure, resulting in the setting of this value to 1, then you can enable this feature by changing this value to 0. See chapter “Installing Advanced Server for UNIX” for more information about Windows NT-style printing upgrade.

Default: 0

Locale REG_SZ Character string

Specifies which locale the Advanced Server will use to translate characters to and from upper- and lower-case letters.

Values: Any valid LC_CTYPE locale.

Default: De_DE.88591

MaxDirectoryBufferSize REG_DWORD 1 - infinity

The maximum size of a buffer that the server will use for a getdents(2) system call to read the contents of a UNIX system directory. Because Advanced Server will attempt to allocate these buffers using the GC memory allocator, one should consider increasing the SizeGcBufferPoolInKB key if one increases this value.

Default: 32768 bytes

Product Manual U7613-J-Z815-6-76