Installing Advanced Server for UNIX

The installation procedure

4.2.2.1Dependencies

You can use Advanced Server for UNIX from clients if one of the client software products described in section “Client software” is installed on them.

4.3 The installation procedure

The software is installed from the CD-ROM using the cdinst utility. cdinst invokes the pkgadd program implicitly. You should proceed as follows:

1.Deinstall LAN Manager/X V2.0, V2.2, V3.5 or V4.0 if they exist.

2.Install the SIreadmeM package with the release information and important information first.

3.Then install NetBIOS and restart the system.

4.The server software of Advanced Server for UNIX can be installed now. There are different installation steps for the

upgrade installation of Advanced Server for UNIX from previous versions and the

new installation of Advanced Server for UNIX.

5.You can now install the optional Advanced Server for UNIX software.

i

If you do not follow this sequence, installation cannot be carried out successfully for, for instance, the server role backup domain controller.

During installation, you must specify the name of the device from which the software is to be installed. The device name of the CD-ROM drive depends on the UNIX system used. For further information, please refer to the UNIX reference manual “Commands – Volume 1 and 2“.

Product Manual

U7613-J-Z815-6-76

Page 47
Image 47
Siemens V4.0 manual Installation procedure, Dependencies