Siemens V4.0 manual See the chapter Configuring NetBIOS

Lanman.ini File			Parameters
	[lmxserver] Section Parameters
	Parameter	Description, Values, and Default Setting
	prebinduxredir	Controls the name that the UNIX system Net command
		binds when it uses the UNIX system redirector
		(uxredir). If this parameter is set to yes, the server pre-
		binds a NetBIOS name that will be used by all UNIX
		system Net commands. Because this name is pre-
		bound, the Net command does not need to bind its own
		name, and this quickens the UNIX system’s Net access
		to the server. If this parameter is set to no, then each
		Net command will use its own unique name with
		somewhat slower performance resulting.
		!	If the Advanced Server NetBIOS names are
			registered dynamically with a WINS server, you
			should not set prebinduxredir to no, as
			otherwise the WINS database can become
			extremely large because of the different names
			for the individual Net commands.
		Values: yes, no; default: yes
	secsources	The names of the modules that can write to the security
		log.
		Default: The server initializes the value of this
		parameter at startup.
	srvstathelpfile	The location of the help file used by the Activity Monitor.
		Default: /var/opt/lanman/msgfiles/001/srvstat.hlp
	stacksize	The size of the stack, in bytes, for each task internal to
		the server.
		Values:12000 - unlimited; default: 30000
	syssources	The names of the modules that can write to the system
		log.
		Default: The server initializes the value of this
		parameter at startup.
	tcp_nodelay	!	Since AS/X V4.0B, the tcp_nodelay parameter
			is no longer supported. The functionality will be
			set by a parameter when NetBIOS is started.
			See the chapter “Configuring NetBIOS” .
			(continued)

Product Manual U7613-J-Z815-6-76