HP Network Direr Software Products Configuration Type Prioritizing NBX Voice Traffic Example

Examples 641

3Click the Device type configuration radio button and select 3Com XRN Fabric from the drop-down list.

4Click Next to show the Servers step in the wizard and continue selecting Next until the Configuration Summary step is shown.

5Click Finish to apply the previously applied configuration to your XRN core.

Prioritizing NBX Voice You have recently installed an NBX phone system in your network and Traffic wish to ensure that the phone calls made using the system are of high

quality, even when the network is congested. To do this:

1Ensure the NBX network call processor has been discovered by 3Com Network Director and is present in the map. See “NBX Phone Detection” on page 95 for more information on how to do this.

2Launch the Prioritize Network Traffic Wizard using Tools> Prioritize Network Traffic.

3In the Introduction step, select Next. The wizard will analyze your network and display the Configuration Type step as shown below:

Figure 349 Configuration Type - Prioritizing NBX Voice Traffic Example

4Click the Network-wide configuration radio button and click Next to show the NBX step.