HP Network Direr Software Products manual NBX Step

Components 633

■Network-wide Configuration — applies the selected configuration to all of the supported 3Com devices in the current map. 3Com recommends that you use this configuration type whenever you intend to make changes to your selection or when you are first configuring traffic prioritization on your network. If a new configuration is not applied across all of the devices then end-to-end traffic prioritization may not be possible.

■Device Type Configuration — applies the selected configuration to all of the devices of a specific type in the current map. 3Com recommends that you only use this configuration type when you have added a large number of devices of a particular type to your network and you wish to configure them to participate in a previously configured end-to-end traffic prioritization.

■Custom Configuration — allows you to choose which of the supported 3Com devices in your network that the wizard should apply the selected configuration to. 3Com recommends that you only use this configuration type when you have added new devices to your network and you wish to configure them to participate in a previously configured end-to-end traffic prioritization.

NBX Step

If your map contains an NBX network call processor then 3Com Network Director will detect this and automatically select NBX phone traffic for prioritization. 3Com Network Director will indicate that it has done this by displaying the NBX step: