HP Network Direr Software Products manual Add Trusted IP Address Dialog Box

598CHAPTER 14: BULK CONFIGURATION

If the trusted IP address list is enabled, but does not contain any entry specifying the IP address of the local management station, with SNMP access set to Enabled, then the configuration template is considered to be invalid. Consequently, applying the configuration template to a device selection will be prevented until the problem is corrected, as this would otherwise prevent 3Com Network Director from carrying out any further configuration of the device.

Not all devices support as many trusted IP addresses as the configuration template allow to be entered. The bulk configuration operation adds trusted IP addresses to the network devices in the order they are shown in the list; in the event that not all trusted IP addresses can be added to a device a warning will be given in the summary report for the operation.

Add Trusted IP Address Dialog Box

Figure 324 Add Trusted IP Address Dialog Box

The Add Trusted IP Address dialog box allows the user to add a new entry to the list of trusted IP addresses. The access methods for the trusted address must be specified.

3Com Network Director does not allow the addition of an entry to the trusted IP address list using an address and subnet mask that is already present in the list.