HP Network Direr Software Products manual Configuration

640CHAPTER 15: PRIORITIZING NETWORK TRAFFIC

The report can help you determine whether you have applied a consistent end-to-end traffic prioritization configuration in your network. This is particularly useful if you have decided to manually configure your devices.

Whenever you run the Prioritization Configuration report, 3Com Network Director retrieves the configuration information directly from the supported 3Com devices in your network. As this report must poll each of the devices for data it may take several minutes to run.

Examples	The following section details useful examples of traffic prioritization
	configuration.

Applying an Existing You have just upgraded the core of your network to an XRN core and Configuration to New wish to configure the XRN devices to participate in the end-to-end

Devices prioritization configuration that you have previously applied to your network. To do this:

1Ensure that the new devices are present in the map.

2In the Introduction step, select Next. The wizard will analyze the devices in the map and display the Configuration Type step as shown in Figure 348.

Figure 348 Configuration Type - Applying an Existing Configuration to New Devices Example