HP Network Direr Software Products manual Summary of changes to be made

550CHAPTER 13: VLAN MANAGEMENT

Figure 297 Specifying an IP Routing Interface

You may create additional IP interfaces on other Layer 3 switches by launching the Add IP Routing Interfaces dialog box again. If one of the new IP routing interfaces that you have added to the table above is incorrect, you can use the Remove IP Interface button to remove it.

Summary of changes to be made

The final wizard stage displays a summary of the devices that are to be configured to create the new VLAN. It lists:

■The name and 802.1Q ID of the new VLAN.

■Any IP interfaces that are to be created for the new VLAN.

■Which ports will be automatically configured to be tagged members of the new VLAN.

■Which ports will be automatically configured to be untagged members of the new VLAN.

■Which ports will have to be manually configured to be tagged members of the new VLAN.

■Which ports will have to be manually configured to be untagged members of the new VLAN.