618CHAPTER 14: BULK CONFIGURATION

Figure 342 Selection Editor Dialog Box – Port Selection

6Click the Add by Type button, and use the Add Ports By Type dialog box to add all of the edge ports belonging to the highlighted devices to the port selection. It is possible to expand the devices and units shown in the selection summary tree to verify that the port selection is as expected.

7Click the Save As button from the Selection Editor dialog box and save the current port selection with a suitable filename, for example Hot-desk ports. The selection will be ready for re-use should the need arise to make further changes to the ports these users are connected to.

8Click OK in the Selection Editor dialog box, and then click OK in the Configuration Editor dialog box to run the bulk configuration of the selected ports.

9In the Schedule Configuration dialog box, select the Start the task now radio button to start the bulk configuration operation immediately, and click OK.

Page 622
Image 622
HP Network Direr Software Products manual Bulk Configuration