HP Network Direr Software Products manual Devices on your network, Web Interface

Examples 493

Examples	The following section provides some examples of how to administer the
	devices on your network.

Renaming a Switch You have a Switch 4007 on your network and you wish to rename it

4007 using Telnet using the Telnet Management Interface. To do this:

1Find the Switch 4007 device in the 3Com Network Director network map. This can be done using Edit > Find if needed.

2Select the device and right-click on it to launch the right-click menu.

3Select the Telnet Management menu item. The Telnet console will be launched.

4Enter your username and password for the device.

5Type set name < new name >.

6Type logout. The Telnet console will close.

7Use Network Discovery to update the current map with the new name.

Disabling a Port on a You have a Switch 4400 on your network and you wish to disable a port Switch 4400 using the on it using the web interface:

Web Interface

1Find the appropriate Switch 4400 device in the 3Com Network Director network map. This can be done using the Find dialog box if needed.

2Select the device and right-click on it to launch the right-click menu.

3Select the Web Management menu item. The default web browser will be launched.

4Enter your username and password for the device.

5Select the Device View tab in the web browser.

6Right-click on the port and select Setup.

7Change the Port State to Disabled and click OK.

8Close the web browser.