HP Network Direr Software Products manual Loading and Saving Configuration Templates

584CHAPTER 14: BULK CONFIGURATION

Loading and Saving Configuration Templates

The configuration template currently displayed in the Configuration Editor dialog box can be saved by choosing the Save As… button beneath the configuration summary tree. Use the file chooser dialog box to find the location in which the configuration template is to be stored and then enter a name for the new file. The default directory will correspond to the type of configuration template being saved, and the default file extension will be .cfg.

A previously saved configuration template can be loaded by selecting the Open… button beneath the configuration summary tree. Use the file chooser dialog box to locate the configuration template to be opened.

It is only possible to load configuration templates that are appropriate for the type of device or port chosen to be configured. For example, if the Configuration Editor dialog box was launched from the Device > Configure > Switch Devices menu option, then it will only allow Switch Device configuration templates to be opened.

Selection Editor The Selection Editor dialog box allows the user to view and modify the Dialog Box selection of devices or ports that a configuration template is to be applied

to, and is launched using the Edit Selection button on the Configuration Editor dialog box.

Figure 316 Port Selection Editor