HP Network Direr Software Products manual Report types, Further details, Assessing Network, This

468CHAPTER 11: CREATING REPORTS

Figure 238 Add/Edit Report Type Wizard - Summary Step

	Click Finish, to add the report type to the Custom Report Types dialog
	box. Click OK to close the Custom Report Types dialog box. You can now
	use your custom report type in the same way as any of the pre-defined
	report types.
Examples	The following section gives some examples of how the Reporting feature
	can be used. The feature-specific report types are covered in the chapter
	for the relevant feature. See “Feature Reports Types” on page 454 for
	further details.
Assessing Network	You have a number of additional servers to add to your network and you
Expansion Capability	want to find out if you have enough capacity in your network and to
	work out which 3Com devices to connect them to.
	You can get an assessment of how much network capacity you have by
	charting available ports using the Save to CSV facility in Reports, in
	combination with an external CSV tool such as Microsoft Excel. To do
	this:

1Launch the Reports dialog box from Tools > Reports and select the Capacity report type.

2Click Generate Report.