HP Network Direr Software Products manual Network Prioritization Report

Components 639

For each device that the wizard cannot support due to licensing reasons, the report lists:

■Device name

■Device type

■IP address

Network Prioritization Report

The Prioritize Network Traffic Wizard automatically generates a Network Prioritization report after it has completed the configuration of your network for traffic prioritization. The Network Prioritization report details the following:

■The servers whose traffic has been prioritized.

■The applications whose traffic has been prioritized.

■The servers whose traffic the network has been configured to block.

■The list of applications whose traffic the network has been configured to block.

■The devices in the network that were successfully configured.

■The devices in the network that the wizard failed to configure. 3Com Network Director reports a reason for each failure.

■Detailed information about the configuration applied to the devices, including any restrictions as to what the devices will do in terms of prioritization and blocking.

Prioritization Configuration Report

If you wish to view the details of the configurations in terms of classifiers, queuing, dropping and marking, run the Prioritization Configuration report. This report can be run from the Reports dialog box, which can be launched by selecting Tools > Reports.

For each device that the report is run against, the Prioritization Configuration report lists:

■The classifiers that are in use on each port

■The service levels that the classifiers map to

■The details of each classifier that is currently in use on the device

■The details of each service level that is currently in use on the device