HP Network Direr Software Products manual Smart Event Analysis will be ignored

354CHAPTER 8: THE EVENT LOG

This dialog box allows you to enable or disable the individual features of

Smart Event Analysis by toggling their respective check boxes.

You may also disable Smart Event Analysis completely by clearing the

Enable Smart Event Analysis check box.

If you completely disable Smart Event Analysis, the per-event settings for

Smart Event Analysis will be ignored.

Controlling SNMP Trap Filtering

The Enable trap filtering option in the global Smart Event Analysis dialog box allows you to enable or disable the entire SNMP trap filtering feature. More precise control over SNMP trap filtering can be obtained by clicking Details to launch the Trap Filtering dialog box:

Figure 168 Trap Filtering Dialog Box

By default, 3Com Network Director discards all SNMP traps received from devices and ports that are not in the current map without generating events for them. The Trap Filtering dialog box allows you to enable or disable the generating of events for SNMP traps that are received from devices or ports that are not in the current map by toggling their respective check boxes.

3Com Network Director will not register itself as an SNMP trap destination with devices that are not in the map.

If you wish 3Com Network Director to receive SNMP traps from a device that is not in the map then you will need to manually add the IP address