HP Network Direr Software Products manual Manual Upload Toggles Manual Upload on/off. If

		Components 411
Menu Item	Hot Key	Operation
Manual Upload		Toggles Manual Upload on/off. If
		Manual Update is enabled, data is not
		retrieved from the device unless the
		Update Data menu option on the
		Update menu, or the Manual Update
		button on the toolbar is selected. The
		Auto Upload and Manual Upload
		options are mutually exclusive.

Line Width > Thick Lines

Line Width > Thin Lines

Table control

Graphed values > Absolute

Graphed Values > Delta

Address Translation > Custom Name

Sets the thickness of the lines displayed on the graph to the thick setting.

Sets the thickness of the lines displayed on the graph to the thin setting.

Launches the Table Control dialog box, allowing you to control the number of table rows displayed.

See “The Table Control Dialog Box” on page 416 for more information.

Configures the graph to display the absolute values of the retrieved data.

Note that the table always displays the absolute values of the retrieved data.

This menu option is not available for history views.

Configures the graph to display the delta values of the retrieved data. Delta values display the difference between the last two data values retrieved, and allow you to more easily view how data is changing over time.

Note that the table always displays the absolute values of the retrieved data.

This menu option is not available for history views.

Sets the address translation level used for all views in RMONView to Custom Name. 3Com Network Director will attempt to display the custom names corresponding to addresses in the host and matrix views.

See “Map Item Labels and Address Translation” on page 175