HP Network Direr Software Products Add Trap Destination Dialog Box, Configuring Spanning Tree

Components 603

Any of the trap destination entries can be removed from the list, by selecting the entries in the list and clicking the Remove button.

3Com Network Director can be configured to create a temporary entry in the trap destination table of all devices that it manages. This temporary entry will be removed by the bulk configuration operation if it is not added to the trap table in this feature panel. Consequently, this could prevent 3Com Network Director from successfully monitoring the network devices.

Not all devices support as many trap destinations as the configuration template allows to be entered. In addition, the bulk configuration operation will not remove existing trap destination entries that have been created by 3Com management if the associated checkbox has been checked in the feature configuration panel. As a result it may not be possible for the bulk configuration operation to add all of the trap destinations specified to every device. The bulk configuration operation adds trap destinations to the devices in the order they are shown in the list; in the event that not all trap destinations can be added to a device a warning will be given in the summary report for the operation.

Add Trap Destination Dialog Box

Figure 328 Add Trap Destination Dialog Box

The Add Trap Destination dialog box allows the user to add a new entry to the trap destination table. The IP address and community string must be specified; the owner description is optional.

Configuring Spanning Tree

The Spanning Tree feature allows the user to configure the bridge Spanning Tree Protocol settings on the devices.