HP Network Direr Software Products manual Following devices stopped responding while 3Com Network

Discovery Report Example Content 863

Discovery Report	This section discusses the contents of a typical 3Com Network Director
Example Content	Discovery Report.
	The following devices stopped responding while 3Com Network
	Director attempted to read topology information from them
	This is as it says. The device must have responded at some point for the
	application to have discovered it. Currently the user has no means of
	increasing the timeout values, although there is a multiplying factor
	stored in SITimeoutRetry.properties.
	The following devices are running with an unsupported version of
	the management agent software
	Each device type has a text file associated with it which stores the
	supported agent versions. If the version read from the device does not
	match any of the values in that file this warning will be logged. The
	application will still continue attempting to read information from the
	device.
	The following devices are running with an unknown version of
	the management agent software
	The application could not determine the agent software version. It is
	therefore likely that it is an unsupported version.
	The VLAN configuration of the following devices could not be
	determined
	This is likely to be if the agent is not a supported version.
	The following devices have been configured into multiple
	segments
	Port Switch Hub 40 and 50 allowed the separation of groups of ports into
	segments. 3Com Network Director does not support this scenario.
	The segment configuration of the following devices could not be
	determined
	This may occur if the agent version is not supported.