HP Network Direr Software Products manual Device Selection Step

488CHAPTER 12: CONFIGURING SINGLE DEVICES

Device Selection Step

The Device Selection step lists the 3Com devices on your network that have not yet been registered as shown in Figure 252.

Figure 252 Device Selection Step

Each row in the list corresponds to a 3Com product. If the device in the map is a stack, the list will contain one row per unit. If the network node in the map is a chassis device, the list will contain one row for each chassis blade.

The Device Selection step contains the following columns:

■Register Now — when the check box in this column is selected, the corresponding device will be registered for warranty. De-select the check box if you do not want this device to be registered

■Device Name — the name of the device as it appears in the map. If the row corresponds to a unit (for a stack) or a blade (for a chassis), the index of the unit or blade will also be specified. For instance, MySwitch (Unit 2).

■Device Type — the type of the product.

By default, all supported 3Com devices are listed and selected.