HP Network Direr Software Products manual Examples

Examples 645

9Click Next to display the next step of the wizard. If the Resource Warning screen is displayed then you may wish to resolve the resource warning before proceeding. Refer to “Resource Warnings” on page 657 for more information.

10When you reach the Configuration Summary step, click Finish to apply the updated configuration to the supported 3Com devices in the map.

Prioritizing a Video The CEO is holding a video conference with direct reports over the Conferencing corporate intranet. Previous conferences like this have been affected by

Application network congestion causing intermittent loss of video and audio. You decide to prioritize the traffic belonging to the video conferencing application to prevent similar disruption to this conference.

You have determined that your video conferencing software uses UDP port 2001 for audio, UPD port 2002 for video and UDP port 2003 for signaling.

1In the Introduction step, click Next. The wizard will analyze the devices in the current map and display the Configuration Type step as shown in Figure 349.

2Select the Network-wide configuration radio button and select Next to display the Servers step.

3Click Next to display the Applications step as shown in Figure 353 below.