HP Network Direr Software Products manual From the Discovery Wizard, Scheduled Tasks

136CHAPTER 4: DISCOVERING THE NETWORK

Figure 49 Scheduled Tasks

Note that by scheduling a discovery this way you need to have already populated your map with any subnets you wish to regularly rediscover. A scheduled discovery cannot be used to discover new subnets. If you haven’t yet done this then you should consider the second option (below).

From the Discovery Wizard

If you haven’t yet populated your map with the subnets you wish to regularly rediscover, the easiest way is to setup the schedule at the same time you perform your initial discovery.

1Launch the Network Discovery wizard (e.g. by selecting Tools > Network Discovery).

2Step through the wizard as you would normally, ensuring you enter the subnets you wish to be discovered (and consequently rediscovered during the scheduled discoveries), and any other fine-tuning you wish to perform.

3When you reach the Scheduled Discovery pane click the Configure

Schedule button.