AS YOU COMPLETE _)_._ _4_ £,4,q; q4.e _.4,_ q4._ _._ DATES
REGU LAR SERVICE /___RVlCE
Check Operator Presence and
TInterlock Systems
RCheck for Loose Fasteners _ Ks I1_
Sharpen/Replace Mower Blades i3
TLubrication Chart I1_
0Check Battery Level
RClean Battery and Terminals
Check Transaxle Cooling
Check V_Belts I_
Check Engine Oil Level II_
Change Engine Oil (with oil filter) I1_,_ I_
EChange Engine Oil (without oil filter) _,2
NCleanAirFiiter _/# _
GClean Air Screen
_ Inspect MuffledSpark Attester I_
EReplace Oil Filter (If equipped) I_
Clean Engine Cooling Fins _
Replace Spark Plug I_ I1_
Replace Air Filter Paper Cartridge 11_2
Replace Fuel Filter
1 = Change more often when operating under a heavy load or
in high ambient temperatures.
2 =Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 _ Not required if equipped with maintenancertree battery.
5 _ Tighten front axle pivot bolt to 35 tt.dbs, maximum.
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
(9 Spindle-- to_-,
Zerk i_--'
_Front Wheel :-'
Bearing _,_
Zerk _,j_
_Engine'..-_-, '
i I
i I
i I
i I
I • ....
_ SePi_dle
/j .=_Front Wheel
:======, /,_earing Zerk
",'.) i
i!(_ General Purpose Grease
Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feel they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
18