•For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high; the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted

when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help

prevent scalping in most terrain conditions. NOTE: Be sure tractor is on a flat level

surface.

1.Lower mower and adjust mower to de-

sired cutting height(See "TO ADJUST MOWER CUTTING HEIGHT' in this

section of manual).

2.Remove retainer spring and clevis pin which secure each gauge wheel bar.

3.Lower gauge wheels to ground. Raise gauge wheels slightly to align holes in bracket and gauge wheel bar and

insert clevis pin. Gauge wheels should be slightly off the ground.

4.Replace retainer spring into clevis pin.

5.Be sure all gauge wheels are in the same setting.

IMPORTANT: Be sure to readjust gauge

wheels if you change the cutting height of the mower deck.

Retainer

Spring

Clevis

Pin

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

1.Select desired height of cut.

2.Start mower blades by engaging at- tachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

A(_CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

Attachment

Attachemnt

 

Lever

"Engaged"

f,;, High

Position

Position

 

Position

"Disengaged'_

 

Position

Deflector

TO OPERATE

ON HILLS

_WARNING:

Do not drive up or down

hills with slopes greater than 15° and do not drive across any slope. Use the slope guide provided at the back of this manual.

•Choose the slowest speed before start- ing up or down hills.

•Avoid stopping or changing speed on hills.

•If stopping is absolutely necessary, push brake pedal quickly to brake posi- tion and engage parking brake.

•To restart movement, slowly release parking brake and brake pedal.

•Slowly depress appropriate drive pedal to slowest setting.

•Make all turns slowly.

TO TRANSPORT

When pushing or towing your tractor, be sure to disengage transmission by placing

freewheel control in freewheeling position. Freewheel control is located at the rear drawbar of tractor.

1.Raise attachment lift to highest position with attachment lift control.

2.Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

•Do not push or tow tractor at more than two (2) MPH.

•To re-engage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

14

Page 13 Page 15
Page 14
Image 14
Craftsman 917.273481 manual To Adjust Gauge Wheels, To Operate On Hills
Page 13 Page 15

917.273481 specifications

The Craftsman 917.273481 is a robust and versatile lawn tractor designed to enhance the efficiency and ease of lawn care tasks. This machine is ideal for homeowners with medium to large yards, providing them with a reliable solution for mowing, mulching, and even towing light loads.

One of the standout features of the Craftsman 917.273481 is its powerful 20 HP Briggs & Stratton engine. This reliable engine ensures smooth operation, excellent performance, and the ability to tackle various terrains with ease. The engine is complemented by a smooth and responsive hydrostatic transmission, allowing for effortless speed adjustments and better maneuverability while navigating lawn obstacles.

The cutting deck on this model is a significant highlight, featuring a 42-inch wide blade system that provides a clean and consistent cut with every pass. The adjustable cutting height, which can be set to various levels, allows users to customize the lawn care according to specific needs and grass types. Additionally, the deck's innovative design promotes better airflow, resulting in enhanced grass clipping dispersion for a healthier lawn.

Another admirable characteristic of the Craftsman 917.273481 is its comfort-driven design. Equipped with an ergonomically designed seat and easy-to-use control panel, it ensures comfort during prolonged use. The tractor’s compact size allows for easy navigation in tight spaces and around flower beds, making it a practical choice for residential gardens.

The Craftsman 917.273481 also incorporates advanced technologies that increase its functionality. Its optional mulching kit allows for efficient grass recycling, potentially reducing the need for bagging clippings. The lawn tractor is also compatible with various attachments, such as snow plows and carts, enhancing its versatility beyond just mowing.

In terms of durability, the Craftsman brand is known for its robust construction, and this model is no exception. The frame is built to withstand the rigors of regular use, while the high-quality materials used in the manufacturing process contribute to its longevity and reliability.

Overall, the Craftsman 917.273481 is an excellent investment for anyone looking to maintain their lawn efficiently. Its combination of power, comfort, and versatility makes it a standout choice in the range of residential lawn tractors. Whether you're mowing, mulching, or tackling other outdoor tasks, this model is designed to get the job done effectively.
Top Page Image Contents