NOTE: The original equipment battery on your tractor is maintenance free. Do not attempt to open or remove caps or covers. Adding or checking level of electrolyte is not necessary.

TO CLEAN BATTERY AND TERMINALS

Corrosion and dirt on the battery and terminals can cause the battery to "leak" power.

1.Remove terminal guard.

2.Disconnect BLACK battery cable first then RED battery cable and remove battery from tractor.

3.Rinse the battery with plain water and dry.

4.Clean terminals and battery cable ends with wire brush until bright.

5.Coat terminals with grease or petro- leum jelly.

6.Reinstall battery (See "REPLACING BATTERY" in the SERVICE AND AD-

JUSTMENTS section of this manual).

TRANSAXLE COOLING

The transmission fan and cooling fins should be kept clean to assure proper cooling.

Do not attempt to clean fan or transmis- sion while engine is running or while the transmission is hot. To prevent possible

damage to seals, do not use high pressure water or steam to clean transaxle.

Inspect cooling fan to be sure fan blades are intact and clean.

Inspect cooling fins for dirt, grass clip- pings and other materials. To prevent damage to seals, do not use com- pressed air or high pressure sprayer to

clean cooling fins.

TRANSAXLE PUMP FLUID

The transaxle was sealed at the factory

and fluid maintenance is not required for the life of the transaxle. Should the trans-

axle ever leak or require servicing, contact a Sears or other qualified service center.

V-BELTS

Check V-belts for deterioration and wear after 100 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear.

ENGINE

LUBRICATION

Only use high quality detergent oil rated with API service classification SF-SJ. Se-

lect the oil'sSAE viscosity grade accord- ing to your expected operating tempera-

ture.

Change the oil after every 50 hours of op- eration or at least once a year if the tractor

is not used for 50 hours in one year. Check the crankcase oil level before start-

ing the engine and after each eight (8) hours of operation.

TO CHANGE ENGINE OIL

Determine temperature range expected before oil change. All oil must meet API service classification SF-SJ.

Be sure tractor is on level surface.

Oil will drain more freely when warm.

Catch oil in a suitable container.

1.Remove oil fill cap/dipstick. Be careful not to allow dirt to enter the engine when changing oil.

2.Remove yellow cap from end of drain valve and install the drain tube onto the

fitting.

Oil Drain Valve

Closed and ,__

Locked l 'J I

Pos,t,on L'"'"\

Yellow Cap _/!--"_'"X_q'_

 

 

" '_

_._/"

_"

"Drain

Tube

O2463

3.Unlock drain valve by pushing inward slightly and turning counterclockwise.

4.To open, pull out on the drain valve.

5.After oil has drained completely, close and lock the drain valve by pushing inward and turning clockwise until the pin is in the locked position as shown.

6.Remove the drain tube and replace the cap onto the end of the drain valve.

7.Refill engine with oil through oil fill dip- stick tube. Pour slowly. Do not overfill.

For approximate capacity see "PROD- UCT SPECIFICATIONS" section of this manual.

8.Use gauge on oil fill cap/dipstick for checking level. Insert dipstick into the tube and rest the oil fill cap on the tube. Do not thread the cap onto the tube when taking reading. Keep oil at "FULl" line on dipstick. Tighten cap onto the tube securely when finished.

20

Page 20
Image 20
Craftsman 917.273481 manual Engine, Transaxle Pump Fluid, Lubrication

917.273481 specifications

The Craftsman 917.273481 is a robust and versatile lawn tractor designed to enhance the efficiency and ease of lawn care tasks. This machine is ideal for homeowners with medium to large yards, providing them with a reliable solution for mowing, mulching, and even towing light loads.

One of the standout features of the Craftsman 917.273481 is its powerful 20 HP Briggs & Stratton engine. This reliable engine ensures smooth operation, excellent performance, and the ability to tackle various terrains with ease. The engine is complemented by a smooth and responsive hydrostatic transmission, allowing for effortless speed adjustments and better maneuverability while navigating lawn obstacles.

The cutting deck on this model is a significant highlight, featuring a 42-inch wide blade system that provides a clean and consistent cut with every pass. The adjustable cutting height, which can be set to various levels, allows users to customize the lawn care according to specific needs and grass types. Additionally, the deck's innovative design promotes better airflow, resulting in enhanced grass clipping dispersion for a healthier lawn.

Another admirable characteristic of the Craftsman 917.273481 is its comfort-driven design. Equipped with an ergonomically designed seat and easy-to-use control panel, it ensures comfort during prolonged use. The tractor’s compact size allows for easy navigation in tight spaces and around flower beds, making it a practical choice for residential gardens.

The Craftsman 917.273481 also incorporates advanced technologies that increase its functionality. Its optional mulching kit allows for efficient grass recycling, potentially reducing the need for bagging clippings. The lawn tractor is also compatible with various attachments, such as snow plows and carts, enhancing its versatility beyond just mowing.

In terms of durability, the Craftsman brand is known for its robust construction, and this model is no exception. The frame is built to withstand the rigors of regular use, while the high-quality materials used in the manufacturing process contribute to its longevity and reliability.

Overall, the Craftsman 917.273481 is an excellent investment for anyone looking to maintain their lawn efficiently. Its combination of power, comfort, and versatility makes it a standout choice in the range of residential lawn tractors. Whether you're mowing, mulching, or tackling other outdoor tasks, this model is designed to get the job done effectively.