BELT INSTALLATION -

1.Carefully work new belt down around transmission cooling fan and onto the

input pulley.

2.Slide belt into the center span keeper.

3.Pull belt toward front of tractor and roll around the top groove of engine pulley.

4.Install belt through stationary idler and clutching idler.

5.Make sure belt is in all pulley grooves and inside all belt guides and keepers.

6.Install mower (See "TO INSTALL MOWER" in this section of manual).

Engine Puiley_

TRANSMISSION REMOVAL/

REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before op- erating the tractor. See "PURGE TRANS- MISSION" in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGN-

MENT

If steering wheel crossbars are not horizontal (left to right) when wheels are

positioned straight forward, remove steer- ing wheel and reassemble with crossbars horizontal. Tighten securely.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not

adjustable on your tractor. If damage has occurred to affect the front wheel toe-in or

camber, contact a Sears or other qualified service center.

TO REMOVE WHEEL FOR REPAIRS

1.Block up axle securely.

2.Remove axle cover, retaining ring and washers to allow wheel removal (rear wheels have a square key - Do not lose).

3.Repair tire and reassemble.

NOTE: On rear wheels only: align

grooves in rear wheel hub and axle. Insert square key.

4.Replace washers and snap retaining ring securely in axle groove.

5.Replace axle cover.

NOTE: To seal tire punctures and prevent

flat tires due to slow leaks, purchase and use tire sealant from Sears. Tire sealant

also prevents tire dry rot and corrosion.

Waalqers

Retaining

Ring

Axle

Cover

I

Square Key

(Rear Wheel Only)

TO START ENGINE WITH A WEAK BAT- TERY

_WARNING: Lead-acid batteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from bat-

teries. Always wear eye protection when around batteries.

If your battery is too weak to start the

engine, it should be recharged. (See "BAT- TERY" in the MAINTENANCE section of

this manual).

If "jumper cables" are used for emergency starting, follow this procedure: IMPORTANT: Your tractor is equipped with a 12 volt system. The other vehicle must also be a 12 volt system. Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery.

25

Page 25
Image 25
Craftsman 917.273481 manual Transmission Removal Replacement, Front Wheel TOE-IN/CAMBER, To Remove Wheel for Repairs

917.273481 specifications

The Craftsman 917.273481 is a robust and versatile lawn tractor designed to enhance the efficiency and ease of lawn care tasks. This machine is ideal for homeowners with medium to large yards, providing them with a reliable solution for mowing, mulching, and even towing light loads.

One of the standout features of the Craftsman 917.273481 is its powerful 20 HP Briggs & Stratton engine. This reliable engine ensures smooth operation, excellent performance, and the ability to tackle various terrains with ease. The engine is complemented by a smooth and responsive hydrostatic transmission, allowing for effortless speed adjustments and better maneuverability while navigating lawn obstacles.

The cutting deck on this model is a significant highlight, featuring a 42-inch wide blade system that provides a clean and consistent cut with every pass. The adjustable cutting height, which can be set to various levels, allows users to customize the lawn care according to specific needs and grass types. Additionally, the deck's innovative design promotes better airflow, resulting in enhanced grass clipping dispersion for a healthier lawn.

Another admirable characteristic of the Craftsman 917.273481 is its comfort-driven design. Equipped with an ergonomically designed seat and easy-to-use control panel, it ensures comfort during prolonged use. The tractor’s compact size allows for easy navigation in tight spaces and around flower beds, making it a practical choice for residential gardens.

The Craftsman 917.273481 also incorporates advanced technologies that increase its functionality. Its optional mulching kit allows for efficient grass recycling, potentially reducing the need for bagging clippings. The lawn tractor is also compatible with various attachments, such as snow plows and carts, enhancing its versatility beyond just mowing.

In terms of durability, the Craftsman brand is known for its robust construction, and this model is no exception. The frame is built to withstand the rigors of regular use, while the high-quality materials used in the manufacturing process contribute to its longevity and reliability.

Overall, the Craftsman 917.273481 is an excellent investment for anyone looking to maintain their lawn efficiently. Its combination of power, comfort, and versatility makes it a standout choice in the range of residential lawn tractors. Whether you're mowing, mulching, or tackling other outdoor tasks, this model is designed to get the job done effectively.