Pin

CHECK FOR PROPER POSITION OF ALL BELTS

See the figures that are shown for replac- ing motion and mower blade drive belts in the Service and Adjustments section of this manual. Verify that the belts are routed correctly.

CHECK BRAKE SYSTEM

INSTALL MULCHER PLATE

(If previously removed)

1.Raise and hold deflector shield in upright position.

2.Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

3.Hook front latch into hole on front of mower deck.

4.Hook rear latch into hole on back of mower deck.

Plate

AI_CAUTION: Do not remove deflector shield from mower.

TO CONVERTTO BAGGING OR DISCHARGING

Simply remove mulcher plate and store in a safe place. Your mower is now ready for discharging or installation of optional grass catcher accessory.

NOTE: It is not necessary to change blades. The mulching blades are designed for discharging and bagging also.

CHECKTIRE PRESSURE

The tires on your tractor were overinflated at the factory for shipping purposes. Cor- rect tire pressure is important for best cutting performance.

•Reduce tire pressure to PSI shown in "PRODUCT SPECIFICATIONS" section of this manual.

CHECK DECK LEVELNESS

For best cutting results, mower hous- ing should be properly leveled. See "TO

LEVEL MOWER HOUSING" in the Service

and Adjustments section of this manual.

After you learn how to operate your trac- tor, check to see that the brake is properly adjusted. See "TO ADJUST BRAKE" in

the Service and Adjustments section of this manual.

v"CHECKLIST

Before you operate your new tractor, we wish to assure that you receive the best performance and satisfaction from this quality product.

Please review the following checklist:

•/ All assembly instructions have been completed.

•/ No remaining loose parts in carton.

•/ Battery is properly prepared and charged. (Minimum 1 hour at 6 amps).

•/ Seat is adjusted comfortably and tight- ened securely.

•/ All tires are properly inflated. (For ship- ping purposes, the tires were overin- flated at the factory).

•/ Be sure mower deck is properly leveled side-to-side/front-to-rear for best cutting results. (Tires must be properly inflated for leveling).

•/ Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers.

•/ Check wiring. See that all connections are still secure and wires are properly clamped.

•/ Before driving tractor, be sure freewheel control is in '"transmission engaged" position (see "TO TRANSPORT" in the Operation section of this manual).

While learning how to use your tractor, pay extra attention to the following important items:

•/ Engine oil is at proper level.

•/ Fuel tank is filled with fresh, clean, reg-

ular unleaded gasoline.

•/ Become familiar with all controls - their

location and function. Operate them before you start the engine.

•/ Be sure brake system is in safe oper- ating condition.

•/ It is important to purge the transmission before operating your tractor for the first time. Follow.proper starting and trans-

mission purging instructions (See "TO START ENGINE" and "PURGE TRANS-

MISSION" in the Operation section of

10this manual).

Page 9 Page 11
Page 10
Image 10
Craftsman 917.273481 manual Install Mulcher Plate, Check for Proper Position of ALL Belts, Check Brake System
Page 9 Page 11

917.273481 specifications

The Craftsman 917.273481 is a robust and versatile lawn tractor designed to enhance the efficiency and ease of lawn care tasks. This machine is ideal for homeowners with medium to large yards, providing them with a reliable solution for mowing, mulching, and even towing light loads.

One of the standout features of the Craftsman 917.273481 is its powerful 20 HP Briggs & Stratton engine. This reliable engine ensures smooth operation, excellent performance, and the ability to tackle various terrains with ease. The engine is complemented by a smooth and responsive hydrostatic transmission, allowing for effortless speed adjustments and better maneuverability while navigating lawn obstacles.

The cutting deck on this model is a significant highlight, featuring a 42-inch wide blade system that provides a clean and consistent cut with every pass. The adjustable cutting height, which can be set to various levels, allows users to customize the lawn care according to specific needs and grass types. Additionally, the deck's innovative design promotes better airflow, resulting in enhanced grass clipping dispersion for a healthier lawn.

Another admirable characteristic of the Craftsman 917.273481 is its comfort-driven design. Equipped with an ergonomically designed seat and easy-to-use control panel, it ensures comfort during prolonged use. The tractor’s compact size allows for easy navigation in tight spaces and around flower beds, making it a practical choice for residential gardens.

The Craftsman 917.273481 also incorporates advanced technologies that increase its functionality. Its optional mulching kit allows for efficient grass recycling, potentially reducing the need for bagging clippings. The lawn tractor is also compatible with various attachments, such as snow plows and carts, enhancing its versatility beyond just mowing.

In terms of durability, the Craftsman brand is known for its robust construction, and this model is no exception. The frame is built to withstand the rigors of regular use, while the high-quality materials used in the manufacturing process contribute to its longevity and reliability.

Overall, the Craftsman 917.273481 is an excellent investment for anyone looking to maintain their lawn efficiently. Its combination of power, comfort, and versatility makes it a standout choice in the range of residential lawn tractors. Whether you're mowing, mulching, or tackling other outdoor tasks, this model is designed to get the job done effectively.
Top Page Image Contents